I've Been An Utter Klutz...

Discussion in 'Speed Triple' started by ChasChas, Sep 17, 2020.

Page 2 of 2
  1. JtC

    JtC Elite Member

    Apr 20, 2020
    2,720
    750
    New Mexico
    #21 JtC, Sep 18, 2020
    Ask dilli to fabricate you one. He can bring Duck over with his angle grinder, just in case.
     
    • Funny Funny x 3
    • Agree Agree x 2
  2. JtC

    JtC Elite Member

    Apr 20, 2020
    2,720
    750
    New Mexico
    #22 JtC, Sep 18, 2020
    One more off-topic in reply . . . o_O

    I've tried Hendrick and didn't care for it. Botanist was ok, but haven't tried the others. These days I'm only allowed one (or two :p) on the week between meds so I can afford to be picky. Flinching at the cost is a habit from my previous life I have trouble breaking.

    As for bourbon, it's Bulleit. That stuff is good. I got started on that after watching Stallone's "Bullet to the Head". Not a bad movie, BTW.
     
    • Like Like x 3
    • Agree Agree x 1
  3. Sandi T

    Sandi T It's ride o'clock somewhere!
    Subscriber

    Dec 3, 2018
    24,370
    1,000
    Tucson Arizona
    #23 Sandi T, Sep 18, 2020
    Thanks, Dartplayer! I'm always up for recommendations. :) This is a gin I've not heard of before.
     
    • Like Like x 2
    • Agree Agree x 1
  4. ChasChas

    ChasChas Marxist Scum

    Aug 9, 2020
    518
    243
    Kent
    #24 ChasChas, Sep 18, 2020
    Bottles, yes? :D
     
    • Funny Funny x 2
    • Agree Agree x 1
  5. JtC

    JtC Elite Member

    Apr 20, 2020
    2,720
    750
    New Mexico
    #25 JtC, Sep 18, 2020
    I opened some box wine the other day. It said on the box it would last six weeks -it was gone in three hours the liars.
     
    • Funny Funny x 6
    • Useful Useful x 2
    • Like Like x 1
  6. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    16,102
    1,000
    slough / burnham
    #26 joe mc donald, Sep 18, 2020
    ChasChas
    Think you lost this topic. Wish you luck in getting your bike sorted.
    Regards
    Joe.
     
    • Agree Agree x 2
    • Funny Funny x 1
  7. Sandi T

    Sandi T It's ride o'clock somewhere!
    Subscriber

    Dec 3, 2018
    24,370
    1,000
    Tucson Arizona
    #27 Sandi T, Sep 19, 2020
    Yes, and I apologize for my part in the derailment, ChasChas. :relieved: Sometimes I really get going when the topic is gin! :rolleyes:
     
    • Funny Funny x 4
  8. ChasChas

    ChasChas Marxist Scum

    Aug 9, 2020
    518
    243
    Kent
    #28 ChasChas, Sep 20, 2020
    I had my own hand in tipping it off the rails
     
    • Like Like x 1
  9. JtC

    JtC Elite Member

    Apr 20, 2020
    2,720
    750
    New Mexico
    #29 JtC, Sep 21, 2020
    I'm guilty as well. :(
     
  10. ChasChas

    ChasChas Marxist Scum

    Aug 9, 2020
    518
    243
    Kent
    #30 ChasChas, Sep 21, 2020
    I *really* wouldn't worry about it
    I've never been a fan of those non gin drinking forums where to stray off topic or follow a tangent is frowned upon
     
    • Agree Agree x 4
    • Like Like x 3
  11. ChasChas

    ChasChas Marxist Scum

    Aug 9, 2020
    518
    243
    Kent
    #31 ChasChas, Sep 21, 2020
    On topic update!
    I ordered a new part from Fowlers (sixty bloody quid!) but it's backorder so I've been quoted ten to fourteen day delivery. Took the money straight away, I *think* technically your card cannot be charged for an item not on the shelf. No matter, that's a row for if there's a problem.
    Meantime I've found a welder with the right kit that can hopefully stick it together on Wed this week.

    The last time I had to find an ali welder was in Tipperary in about '87 when my GSX1100 slid on gravel and punched a hole in the generator cover when it hit the ground. Repair then was ten Irish punts. Let's see what inflation brings ;)
     
    • Like Like x 3
  12. JtC

    JtC Elite Member

    Apr 20, 2020
    2,720
    750
    New Mexico
    #32 JtC, Sep 21, 2020
    Whatever it takes for our loyal steeds.
     
    • Agree Agree x 3
  13. ChasChas

    ChasChas Marxist Scum

    Aug 9, 2020
    518
    243
    Kent
    #33 ChasChas, Sep 23, 2020
    Job done. Im not bothering to clean up any more than i have as its a stopgap till the new one arrives.
    Best of all was i didn't get charged a bean as it was considered repayment for a previous favour done. The bank of Karma is great when it works

    IMAG4933.jpg
     
    • Like Like x 10
  14. Captain Trips

    Captain Trips Member

    Feb 4, 2019
    74
    18
    Surrey, UK
    #34 Captain Trips, Sep 25, 2020
    Hi ChasChas, apologies for not getting to this sooner, but I've been in Cornwall for a week with all the wonderful connection difficulties you can imagine. Can I ask what year bike you have? I have a full set of footrests from an '07 Speedy which are in good shape, happy to donate them to a good cause if they'll fit yours. I'm on the Surrey/Hampshire border and happy to take a spin in the Kent direction. The measurement between fittings looks like 70mm.

    PS Wrecking Coast honey sloe gin is apparently very pleasant...

    736B7D5B-2842-47D1-A4D6-A0C41BCFC0DC.jpeg
     
    • Like Like x 3
  15. ChasChas

    ChasChas Marxist Scum

    Aug 9, 2020
    518
    243
    Kent
    #35 ChasChas, Sep 25, 2020
    Thanks Captain *salutes*
    I'll be fitting a new assembly tomorrow, it turned up today and I already had my welded repair set to go, the new part turned up earlier than predicted.

    Many thanks for the offer, I'll actually measure the pitch on the rest in a min for anybody elses reference, my bike is an '02 but it'd be useful for the collective hive Triumph mind to know if there *is* interchangability
     
  16. ChasChas

    ChasChas Marxist Scum

    Aug 9, 2020
    518
    243
    Kent
    #36 ChasChas, Sep 25, 2020
    68mm centres for an 02.

    Who is responsible for entering that to 'the record',

    IMAG4935.jpg
     
  17. Captain Trips

    Captain Trips Member

    Feb 4, 2019
    74
    18
    Surrey, UK
    #37 Captain Trips, Sep 26, 2020
    No problems, just stay away from that gate! o_O
     
    • Funny Funny x 1
Page 2 of 2
Loading...
Similar Threads - I've Been Utter
  1. BonnieCat

    I've Been Naughty

    BonnieCat, Sep 19, 2017, in forum: Lounge
    Replies:
    18
    Views:
    2,333
    BonnieCat
    Sep 20, 2017
  2. Hedgehog

    Sorry I've been away...

    Hedgehog, Mar 4, 2015, in forum: Lounge
    Replies:
    11
    Views:
    1,704
    thebiglad
    Mar 9, 2015
  3. BlisterMan

    2002 955i Issue I've Made.....

    BlisterMan, Apr 7, 2025, in forum: Technical Help
    Replies:
    8
    Views:
    1,534
    blacktiger
    Apr 15, 2025
  4. Aaron Platke

    06 Speed Triple Eating Up Starter Gears Twice I've Replaced The Starter Please Help Me What Is My Pr

    Aaron Platke, Mar 2, 2021, in forum: Technical Help
    Replies:
    2
    Views:
    1,454
    Aaron Platke
    Mar 6, 2021
  5. DavidBrownLaw

    I've Named Her And Thanks

    DavidBrownLaw, Jul 27, 2020, in forum: Bonneville
    Replies:
    14
    Views:
    2,052
    pistonbroke
    Aug 12, 2020

Share This Page

Sign up