Tiger 900 Gt Pro Dashboard Issues

I bought my new Tiger 900 GT Pro on June 4th, Montreal, Canada. Driving the motorcycle appealed to me immediately. A pleasure to drive. The 7" dashboard is very impressive. Love the bike!
Unfortunately, the sliding plate for the Trekker 42 L top box is still b/o two months after purchase. I also had two problems at the dealer with the dashboard after the 1000 km inspection a couple of weeks ago. The light that indicates that I have to do maintenance is always on now. Also, the automatic turn signal only work in manual mode since the update of the system at the dealer. They don't know why and they were suppose to contact Triumph about that. And the function for the signal lights auto / manual mode has disappeared from the dashboard. Anyone had an issue with these problems ?

 

Hello Sylvain
Hopefully someone or your dealer will have an answer for you.

 

New bike new problems, good luck with a fix from Triumph

 

This is probably not related but I am sure I have seen (either here or elsewhere) that a similar problem on this bike was solved by tightening a connector behind the headlights?

 

Just joint this forum and new to Triumph Bikes in fact this is first one ever
I got a 900 Tiger GT Pro love the looks and bike so far but did have a scare just this past week while drive around Bar Harbor Maine.
So just had the first service done at 500 mile which included a software update.
Two days after the update while riding on vacation the dashboard/Screen went crazy after a short stop and restart. Screen started scrolling Hexadecimal numbers error codes. I stopped and turn the bike off. But the screen stayed on and in fact the bike would not restart.So I disconnected battery and thus power.
Wait about 30 sec reconnected power and screen return to normal except for the check engine light and wrench appears. The bike ran fine and the screen operated correctly. The check engine light went out but the service wrench is still present. Will be calling dealer to see what is up and will let you know

 

Howdy Jim

 

Been a few problems with this bikes screen after being updated
Apparently it’s dealer error not resetting it properly

also hi and welcome

 

Hi to both and thanks, waiting for the dealer call back

 

Hi there!
Did you reset the clock and date after restoring power?
Could be why the icon is on but certainly not explain the crazy!

 

If clock you mean time yes or do you mean something else?

 

here is pic of the screen

 

the black area was actually flashing data and showed all screens data overlay

 

Hope you get this sorted soon. It must be irritating with a new bike.

 

not sure on the 900 but on the rs, there is the date too!
I presume it's on the same screen setting!

 

Hello mate! I had exactly same problem from indicators.... my dealer fixed it with a firmware update for the main computer.

 

Ok. Good to know. I will be returning to the dealership only next summer. My season is already over because I work in a remote region now. Thank you.

 

My dealer knew very little about it. After the 800 km update there were several errors on the dashboard. Some have disappeared after the reset I did on the dashboard.

 

Thanks Jim. I didn't have this problem and I wouldn't have liked it to happen to me, OMG

 

This has just happened to me, awaiting a reply from the dealer.

 

Steve
I have not had an issue since and screen working fine but finally going to dealer today to get wrench reset and too see what they have to say concerning this