could any R owner (2016) Ohlin's forks measure the distance in-between the discs' outside to outside, I'm fitting a R front end to my Speed Twin, and it would appear that the Speed Twin has a slightly wider front end. This not allowing me to mount the R Brembo callipers correctly
Col, thanks for that, mattP also replied with the same measurement, "Measure Twice Cut Once" still rings true all these years after my apprenticeship
Col I am going to look at taking 7mm of each side of my wheel , that is off the disc mounts hopefully
Have you got to skim the wheel hub? (going to need a lathe with a big throw - or get wheel horizontal on a mill?).
The company i work for (30 years) use a local firm for all our machined/engineered components, he likes motorbikes so i will ask the question
Dear all. i have a set of 2019 speed twin wheels/tyres of a 600 mile bike, also the rear shocks and front forks the yokes and the callipers and discs all off a 2019 Speed Twin with 600 miles from new, i will post some photos this weekend, I'm open to offers as i need the room in the cave. please message offers for anything I've listed. Please don't try and take the piss.
Dilli don't take the piss out of the 4" & 9" grinder, commonly known within on site engineering services as "A precision Altification correctional adjustable milling machine".
