hi ,anyone fitted these to a 2019 uk speed trriple rs ? i fitted them on the front of mine they worked fine ,then they stopped , i put the standard led's back on & they work ,i asked at triumph ,they said they thought they were designed for the new street triple (has them fitted as standard) but they sell them as accessories , surely if there is any difference it would just be a matter of telling the ecu?
If they worked then stopped then it sounds like they’re faulty. Get them back to where you bought them from.
Then the indicators themselves have to be faulty it would seem. What is the part number on them? Are they UK/Euro only? I haven't seen Triumph branded sequential indicators here in the USA.
yes genuine triumph ,i dont have the part number just heard ,there may be an issue with them ,i'll let you know
I’m sorry but has anyone else seen the irony here, indicators that work, then they don’t, work, then they don’t I’ll get me coat.
Similar problem, bought set of Oxford Nightrider sequential LED indicators for 2019 Speed RS and tried to fit rear today. With both connected could only get one indicator flashing using supplied resistor. Without resistors, neither flashing. As I have four indicators I swapped parts to check if faulty - same problem. I am assuming the relay is for LED as the stock indicators seem to be LED - is there any point switching the relay, is there another issue? Thought this would be a simple mod...Any help appreciated.
triumph took them off the shelf because of problems,then supplied me with another set (new part number),one of the new ones wasn't working so i managed to get a replacement for that one ,but they said they'd taken them off the shelf again,hope they get it sorted out ,they are pretty smart when the work, no resisters needed on the uk 2019/20 rs