Rear Wheel Axle

1977 Bonnie....Okay so I am getting old. A thought came over me the other day that may be, just may be I installed the rear axle backward, or will it only go one way through the rear hub? Right to left with the nut on the left, or left to right with the nut on the right, or does it really matter?..... FYI: For those with the front brake locking up. I did everything to fix the front brake from locking. Rebuilt master cylinder, cleaned calipers and metal lines, but did not change the rubber lines to the brake. Well that was the problem. The rubber line on the bottom was clogged. It would allow fluid to apply brakes but not return to the master cylinder. New lines and the brakes are like new. A less than $30.00 fix.....Front wheel hop: I purchased a wheel stand for balancing and balanced both wheels. Problem solved however, it appears the rear wheel not the front was causing most of the front end hop..... Now, riding up and down the beach like a dream. Any thought on the axle would be appreciated but please be nice......

 

Something I just discovered about mounting a tire on to and old rim. If the bead is popping out, it' not the tire but the rim. Old rims have a tendency to rust, and just a little rust will stop the tire from seating on the rim leaving a bulge in the tire at the rim. On my old bicycle I squirted a bit of WD40 on the inside of the lip and the tire seated perfectly. Not sure it will work on a motorcycle, but because of the lack of experience at two motorcycle shops and $550.00 later a second new tire and loads of BS finally got the hump out of my front tire. Soapy water also does the trick.

 

TY: Makes sense. I found pics from the early 80s and the nut was on the left. The parts manuel has the axle sliding in from the left, but I don't ever recall being able to slide the axle on my Bonnie in from the left. I have seen various years and even the 77 with the axle going either way, but your scenario makes sense. Anyhow, thank you for your input. I'm going to leave it the way it is. Nut on left.

 

TY
TY. Good to know.