Alarm And Indicators

Discussion in 'Technical Help' started by chipmiester, Aug 11, 2019.

  1. chipmiester

    chipmiester Member

    Mar 25, 2019
    30
    18
    tewkesbury uk
    #1 chipmiester, Aug 11, 2019
    OK guys think I've sorted my cooling issues on my 05 955i daytona (new hoses, thermostat, cooling flush) my issue now is I had to disconnect alarm which left me stranded, triumph datatool shite. So I linked the 2 pairs of wires on connector coming from alarm. Bike runs now but indicators won't work, is their another wire I have to link? Thanks in advance.
     
  2. D'Ecosse

    D'Ecosse Senior Member

    Jun 23, 2019
    271
    113
    CA, USA
    #2 D'Ecosse, Aug 11, 2019
    You don't need to so anything at alarm connector regarding turn signals
    You probably have something else going on
    Does your brake light & horn work? Those circuits all share same fuse. You wouldnt be aware of the brake light not working & unlikely you would have tried horn but turns would be noticable from riders perspective.
    So start by checking those & if dont work check the fuse.
     
    • Like Like x 2
  3. chipmiester

    chipmiester Member

    Mar 25, 2019
    30
    18
    tewkesbury uk
    #3 chipmiester, Aug 11, 2019
    When I first disconnected alarm the horn wouldn't work, checked the fuses and replaced with new ones. Horn and brake lights work but indicators Don. They worked fine till alarm played up and immobilised the bike, maybe indicator switch gone but bit of a coincidence?
     
    • Like Like x 1
  4. D'Ecosse

    D'Ecosse Senior Member

    Jun 23, 2019
    271
    113
    CA, USA
    #4 D'Ecosse, Aug 11, 2019
    So something blew your fuse ...
    You checked the brake & horn after replacing, but did you check again after you attempted to operate the turns?
     
    • Like Like x 1
  5. chipmiester

    chipmiester Member

    Mar 25, 2019
    30
    18
    tewkesbury uk
    #5 chipmiester, Aug 11, 2019
    Yes horn still works and brake light works but no indicators, if indicator relay faulty would that cause indicators to stop, only saying this cause a couple of days before alarm buggered up I could hear ticking noise coming from under seat even though indicators were off, very strange.
     
  6. freck

    freck Elite Member

    May 4, 2017
    1,721
    750
    Preston, Lancs, UK
    #6 freck, Aug 11, 2019
    My indicator relay failed and stopped all the indicators working. If you pressed the top of it, it would work. :confused: I thought it may have been a bad connection and had it all apart but couldn’t find anything wrong.
    Replaced the relay and all was well again. :grinning:
     
    • Like Like x 1
  7. chipmiester

    chipmiester Member

    Mar 25, 2019
    30
    18
    tewkesbury uk
    #7 chipmiester, Aug 11, 2019
    Sounds like a plan then, new relay then go from their
     
Loading...
Similar Threads - Alarm Indicators
  1. Tony Varghese

    10a Ignition Fuse And 15a Instruments And Alarm Fuse Blowing

    Tony Varghese, Jul 23, 2025, in forum: Technical Help
    Replies:
    2
    Views:
    606
    Mark TGR9
    Jul 28, 2025
  2. Clive Dackus

    Datatool Alarm - Bike Will Not Start.

    Clive Dackus, May 10, 2025, in forum: Triumph General Discussion
    Replies:
    5
    Views:
    3,273
    Pegscraper
    May 13, 2025
  3. TheOtherDennis

    Disconnect Tiger 800 Xrt Alarm

    TheOtherDennis, Feb 12, 2025, in forum: Technical Help
    Replies:
    6
    Views:
    1,100
    sprintdave
    Feb 14, 2025
  4. Kempo Maximus

    Looking For Alarm For My 24 765 Rs

    Kempo Maximus, Aug 29, 2024, in forum: Triumph General Discussion
    Replies:
    4
    Views:
    1,361
    Iceman
    Sep 8, 2024
  5. Slinky

    Alarm Question

    Slinky, Apr 6, 2024, in forum: Technical Help
    Replies:
    0
    Views:
    307
    Slinky
    Apr 6, 2024

Share This Page

Sign up