New T100 Issue, Help Please!

Hi
I’ve got a new T100 black , 650 miles on it now. Today I suddenly ran into an issue whilst out on it and wanted advice please.
Approaching a roundabout I couldn’t downshift or even up from 3rd. When I stopped, the bike stalled with the clutch in and I had to start and take off in third. I got a hundred yards and pulled over. I’m able to change gear again but it’s pretty clunky, especially third. The bike still wants to move with the engine running and in gear, even with the clutch engaged so I’m wondering if I’ve got a clutch issue. The clutch lever doesn’t seem entirely right as I think it feels like there’s less tension in it but I could be imagining that to be honest.
Any thoughts appreciated. Cheers

 

Thanks. I’m 120 miles from the nearest dealer too!. I let it cool and it’s now not going into neutral with engine on but driving better, although still really clunky downshifts? Nice and sunny outside too so this is a real pisser!

 

Hi Callumity. I’m not great mechanically so not sure I follow. I can only get it in neutral if switched off. When I start it in gear it’s as if the clutch isn’t quite fully disengaged and it still wants to move a little. It was actually worse earlier to the point it stalled if I stopped. When I put clutch lever fully in it only needs released 1mm before it starts to bite. Thanks

 

Thankyou, handbook in hand just now so will give it a go now and see if it sorts it out. I’m aiming for 3mm according to the book.

 

Thanks guys, that seems to have done the trick and much better now . Glad it was something simple, even if it makes me look like a dafty

 

Thanks guys, that seems to have done the trick and much better now . Glad it was something simple, even if it makes me look like a dafty