Bonneville Lower Bars

Renthal medium bars mate - spot on.

 

They are a 2" rise as compared to 5" on the standard bar. Renthal do a low bar as well but that was too low for what I wanted.

 

These pics should be better. I think they may be a 3" rise though.

 

Sorry mate, only just got decent Wi-Fi or would have sent them earlier!

 

Feels just right for me and I don't really notice leaning forward anymore than I did. MOT tester last year said It was the most comfortable Bonnie he's sat on!

 

I've got LSL low superbike steel bars, still feel quite upright to me but I'm used to lower bars. I find them very comfortable and they do give some weight over the front. I think they have a 5cm rise.

 

Alloy mate. Try not to drop it

 

Thanks,

As it happens I'm just about to replace them because of the ongoing saga from my missus knocking over the bike, that's why the bike is that blue colour. Didn't notice until I started riding it again that the bars are slightly bent. When I looked online I couldn't seem to find the same bars and prices for a bent piece of metal tube were ridiculous! However, I think I found the same bars for £34 from Motorcycle Road and Race Ltd, LSL Superbike Flat 22mm Steel (123LN01) = £34.00
Colour: Black

Found an old picture which shows the rise a bit better.

Cheers

 

I used to always install Dunstall flats on my bikes. They used to be the best for me

 

Norman Hyde have some options for you https://normanhyde.co.uk/hinckley-triumph/bonneville-se-2009-onwards.html?hinckely_categories=4