T120 Remus Fitting On Friday

Discussion in 'Bonneville' started by Cupoftea, Jul 4, 2019.

  1. Cupoftea

    Cupoftea Noble Member

    Joined:
    Dec 16, 2018
    Messages:
    462
    Likes Received:
    570
    Trophy Points:
    343
    Location:
    NEW FOREST
    Decided the vance and hines are nice but too quiet, so ordered the short Remus pipes which will arrive tomorrow. So off with the v&h and on with some proper noise.
    Just to add, the Remus pipes do make the bike rev better, was blasting along the countryside this morning and noticed that it was very easy. to red line.
     
    #1
    Last edited: Jul 6, 2019
    • Like Like x 2
  2. John Wells

    John Wells Well-Known Member

    Joined:
    Jun 28, 2019
    Messages:
    13
    Likes Received:
    19
    Trophy Points:
    53
    Location:
    Birmingham
    Hi
    Are you looking to sell the V&H pipes?
     
    #2
  3. Cupoftea

    Cupoftea Noble Member

    Joined:
    Dec 16, 2018
    Messages:
    462
    Likes Received:
    570
    Trophy Points:
    343
    Location:
    NEW FOREST
    If I do, I'll put them on here first.
     
    #3
    • Like Like x 2
  4. Cupoftea

    Cupoftea Noble Member

    Joined:
    Dec 16, 2018
    Messages:
    462
    Likes Received:
    570
    Trophy Points:
    343
    Location:
    NEW FOREST
    Arrived this afternoon, on the bike in 30 minutes. With baffles very nice, a little more throttle response. Baffles out, now there's a challenge, they tack welded a ring in the baffle to stop the circlip compressing. Simply snap the weld and all was good.
    Final result it sounds like a raging bull, the only way I can describe it.
    Got the thumbs up from a kids crossing guy, he was very impressed so I gunned it for him. Kids ran for cover.
     
    #4
    • Like Like x 1
    • Funny Funny x 1
  5. ZShyster

    ZShyster New Member

    Joined:
    Dec 18, 2019
    Messages:
    20
    Likes Received:
    15
    Trophy Points:
    3
    Location:
    elmhurst il
    I have a 2018 T120 and was wondering what the part numbers were for your Vance and Hines mufflers. I found a set locally that came off of a T100 and wondered if they would fit my T120 as they appear unavailable anymore new. The guy says the part numbers are A9600669 and A9600668. Any help would be appreciated.
    Ride Safe
    ZShyster
     
    #5
  6. Cupoftea

    Cupoftea Noble Member

    Joined:
    Dec 16, 2018
    Messages:
    462
    Likes Received:
    570
    Trophy Points:
    343
    Location:
    NEW FOREST
    I would check the pipe diameters, as I believe that the triumph 900 may be smaller.
     
    #6
Loading...

Share This Page