Chugging Bonnie

Discussion in 'Bonneville' started by Ray von Twome, May 27, 2019.

Tags:
Page 1 of 2
  1. Ray von Twome

    Ray von Twome Member

    May 26, 2019
    13
    8
    London
    #1 Ray von Twome, May 27, 2019
    I'd be grateful if anyone identifies with my problem and knows the solution. My 2011 T100 refuses to rev above 5400rpm and protests by chugging and the engine light comes on temporarily. Soon as I drop the revs the engine light and chugging disappear! Other than aftermarket pipes it has no other mods.
     
    • Useful Useful x 1
  2. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,658
    1,000
    Southcoast of the UK Earth
    #2 darkman, May 27, 2019
    Is the choke fully pushed in.
     
    • Agree Agree x 1
  3. David Cooper

    David Cooper Triumph Rocketeer.
    Subscriber

    Jun 23, 2018
    28,821
    1,000
    The Land of the Prince Bishops.
    #3 David Cooper, May 27, 2019
    Hello and welcome to the forum Ray.

    98636c6ee64925a19858f8a491d300d2.gif
     
    • Like Like x 1
  4. Wishbone

    Wishbone First Class Member

    Nov 4, 2018
    866
    643
    Essex UK
    #4 Wishbone, May 27, 2019
    Can't your ride friend give you the answer;)

    Sounds like a Fuelling issue, some history of bike would be useful Service history?

    It could be as simple as a blocked filter or as complex as fuel pump, or plugs/coil so a code read could help spot the issue.
     
    • Agree Agree x 3
  5. Tiglet

    Tiglet Vintage Member

    Mar 28, 2016
    4,434
    1,000
    Cheshire
    #5 Tiglet, May 27, 2019
    Hello Ray and welcome to the forum :)

    Hope you sort your problem.
     
    • Like Like x 1
    • Agree Agree x 1
  6. Ray von Twome

    Ray von Twome Member

    May 26, 2019
    13
    8
    London
    #6 Ray von Twome, May 27, 2019
    Hi, thanks for your response. Yes it is. I've changed plugs, oil, checked the air filter but all to no avail!
     
    • Agree Agree x 1
  7. Ray von Twome

    Ray von Twome Member

    May 26, 2019
    13
    8
    London
    #7 Ray von Twome, May 27, 2019
    • Agree Agree x 1
  8. Ray von Twome

    Ray von Twome Member

    May 26, 2019
    13
    8
    London
    #8 Ray von Twome, May 27, 2019
    It's supposed to redline at 8000rpm. I'm getting blown off by pizza boys!
     
    • Funny Funny x 1
    • Agree Agree x 1
  9. Ray von Twome

    Ray von Twome Member

    May 26, 2019
    13
    8
    London
    #9 Ray von Twome, May 27, 2019
    I've had it on the computer and it shows no faults. It has TORS on it and I wonder if it was ever remapped for them?
     
    • Agree Agree x 1
  10. Ray von Twome

    Ray von Twome Member

    May 26, 2019
    13
    8
    London
    #10 Ray von Twome, May 27, 2019
    I've had it on the computer and it shows no faults. It has TORS on it and I wonder if it was ever remapped for them?
     
    • Agree Agree x 1
  11. Wishbone

    Wishbone First Class Member

    Nov 4, 2018
    866
    643
    Essex UK
    #11 Wishbone, May 28, 2019
    Just a thought, but are you sure that the throttle cables are giving full range, does it rev past 5400 when in neutral or any gear?
     
    • Agree Agree x 1
  12. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,242
    1,000
    North Yorkshire
    #12 steve lovatt, May 28, 2019
    Hi and welcome to the forum.
    Ideally the bike should be remapped after fitting TORS but if there are no modifications on the induction side then it should still run OK providing you're not caning it the whole time and it should certainly rev higher than that. :cool:
     
    • Agree Agree x 1
  13. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,362
    800
    Nr Biggar
    #13 Callumity, May 28, 2019
    When you say the computer do you mean no fault codes via the OBD cable?

    The flashing checklight would seem to indicate a sensor or ECM issue.
     
    • Agree Agree x 1
  14. Wishbone

    Wishbone First Class Member

    Nov 4, 2018
    866
    643
    Essex UK
    #14 Wishbone, May 28, 2019
    Ray we need more info, in your newbie intro you mention getting rid of emissions stuff, has this been done?
    Again any info/history will help diagnosis.
     
    • Agree Agree x 1
  15. Ray von Twome

    Ray von Twome Member

    May 26, 2019
    13
    8
    London
    #15 Ray von Twome, Jun 3, 2019
    The fault I have predates any mods. I haven't revved it in neutral for the sake of the neighbours but I'll need to check that.
    It seems that I do have the TORS map. I'm about to go outside and see if for some reason the revs have been capped at 5400. I thought the mods would cure the problem but it doesn't seem to have made any difference to it!
    I did wonder if the bike had been deliberately restricted to comply with A2.
     
    • Agree Agree x 1
  16. Ray von Twome

    Ray von Twome Member

    May 26, 2019
    13
    8
    London
    #16 Ray von Twome, Jun 3, 2019
    I've just had it on the tune ECU via the obd2 and the revs are set at 8000rpm which it reached in neutral without any issues. It's on the right map for Tors. No errors on obd2.

    When in gear the engine management light only comes on at 5400 rpm, the speedo needle drops off to zero but as soon as I ease off the throttle light goes off and speedo is fine again!
     
    • Agree Agree x 1
  17. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,362
    800
    Nr Biggar
    #17 Callumity, Jun 3, 2019
    Last edited: Jun 3, 2019
    The speedo needle may be a clue. It takes its feed from the ECU rather than the coil........
    Without an electronic lab you can only really test it by substitution. Any London owners nearby! It’s a 10 min swap out....
    Otherwise https://www.triumphtwinpower.com/bonnevillet100-performance-tune-1.php
    may be a slightly expensive punt if you ring ahead to see if you can send your ECU for a remap and test.
    Or https://www.ebay.co.uk/itm/TRIUMPH-...613705?hash=item2ce02d1c09:g:3cQAAOSwM5tb~VSC

    Is there any chance your lambda sensor is shot and have you run an adaption process to reset the throttle position sensor?
     
    • Agree Agree x 1
  18. Ray von Twome

    Ray von Twome Member

    May 26, 2019
    13
    8
    London
    #18 Ray von Twome, Jun 3, 2019
    I went to Carl Rosner today and put my problem to one of their guys. He's no idea what's going on with it.

    Lambda sensors are not present.

    I've been considering sending it off to ttp. Dont have the money yet. I did email them but didnt get a response.

    The bike seems great other hitting that wall, which has moved to 6000rpm.
     
    • Agree Agree x 1
  19. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,362
    800
    Nr Biggar
    #19 Callumity, Jun 3, 2019
    That funny thing screwed into your exhaust header with a wire coming off it is a lambda sensor......

    What sort of air filter have you got? Tried running without?
     
    • Agree Agree x 1
  20. Ray von Twome

    Ray von Twome Member

    May 26, 2019
    13
    8
    London
    #20 Ray von Twome, Jun 3, 2019
    I've removed my lambda sensors and fitted resistors so the bike doesn't know they've gone.

    It's only got a standard filter at the moment but I'm thinking of getting a hi flo one. I'm going to see how she goes without a filter.
     
    • Agree Agree x 1
Page 1 of 2
Loading...
Similar Threads - Chugging Bonnie
  1. jpotter23

    '24 Bonnie T120 Error Code Reset

    jpotter23, Sep 21, 2025, in forum: Technical Help
    Replies:
    0
    Views:
    116
    jpotter23
    Sep 21, 2025
  2. Regit nogara

    My Dogs Have Stolen My Bonnie!

    Regit nogara, Sep 17, 2025, in forum: Lounge
    Replies:
    18
    Views:
    1,632
    Regit nogara
    Oct 8, 2025
  3. joe mc donald

    Seat 2010 Bonnie

    joe mc donald, Sep 4, 2025, in forum: Parts, Accessories & Clothing
    Replies:
    0
    Views:
    303
    joe mc donald
    Sep 4, 2025
  4. Foxy2000

    Bonnie 865 Se Side Stand

    Foxy2000, Aug 15, 2025, in forum: Wanted
    Replies:
    3
    Views:
    651
    Foxy2000
    Aug 23, 2025
  5. tonupkid

    Bonnie T100 Efi Remap In The North West (uk)

    tonupkid, Jul 22, 2025, in forum: Triumph General Discussion
    Replies:
    4
    Views:
    661
    tonupkid
    Jul 27, 2025

Share This Page

Sign up