Check Before Starting

Discussion in 'Speed Triple' started by Carl Williams, Apr 10, 2019.

  1. Carl Williams

    Carl Williams Oooh, something shiny

    Mar 25, 2019
    37
    13
    Exeter, Devon, UK
    #1 Carl Williams, Apr 10, 2019
    OK, I got my bike a couple of weeks ago, it came with Rizoma Flat Bars. I've also got the original bars so I thought I'd spend a little time this morning removing the flat bars and putting the standard bars back on. All going well until I got to the last screw to loosen the throttle and I discovered whoever had fitted the flat bars had completed ruined the head of the screw!

    So now I'm left with a bike with pretty much everything that supposed to be attached the the handlebars haging off and I have to wait for delivery of a set of screw extractors to finish the job, why oh why didn't I check first!!!!!!!!!!!!!!
     
    • Disagree Disagree x 1
  2. Clarkey231

    Clarkey231 Noble Member

    Jun 9, 2016
    473
    313
    Exeter
    #2 Clarkey231, Apr 10, 2019
    That is something i would do, not round off screw but not check.
    Every single time i go to remove the rear wheel i get it up on the abba stand then realise i need to losen the axle nut with the bike on the ground first. Does my head in!

    Where abouts in Devon are you?
     
    • Like Like x 1
  3. Bryan3R

    Bryan3R Senior Member

    Jun 22, 2018
    230
    293
    Southend, Essex, England
    #3 Bryan3R, Apr 10, 2019
    have you got a Drimmel wit her the small round cutting disks, you can cut a slot in it and. use flat screwdriver to undo it.
    Will it not slide off with one screw out or has it got a locating pin into bars, mine has been removed if they were fitted with them.
     
    • Like Like x 1
  4. SteveRS

    SteveRS First Class Member

    Jan 12, 2019
    862
    500
    British Columbia
    #4 SteveRS, Apr 10, 2019
    That blows for sure :triumph:
     
    • Like Like x 1
  5. Red Thunder

    Red Thunder Crème de la Crème

    Dec 2, 2014
    2,037
    1,000
    High Wycombe
    #5 Red Thunder, Apr 10, 2019
    • Like Like x 4
    • Useful Useful x 1
  6. Carl Williams

    Carl Williams Oooh, something shiny

    Mar 25, 2019
    37
    13
    Exeter, Devon, UK
    #6 Carl Williams, Apr 10, 2019
    Hopefully the screw extractors will turn up tomorrow so I can finish the job and get out on the bike this weekend.

    I'm in the Exwick area of Exeter, what part of Exeter are you in Clarkey?
     
  7. Wessa

    Wessa Cruising

    Apr 27, 2016
    11,839
    1,000
    North West England
    #7 Wessa, Apr 10, 2019
    Bad luck mate. Not sure many would have checked the screws before starting, so don't beat yourself up to much....
     
    • Like Like x 1
  8. Clarkey231

    Clarkey231 Noble Member

    Jun 9, 2016
    473
    313
    Exeter
    #8 Clarkey231, Apr 10, 2019
    Countess weir mate. Although away for a couple of weeks fromFriday for work.
     
  9. Carl Williams

    Carl Williams Oooh, something shiny

    Mar 25, 2019
    37
    13
    Exeter, Devon, UK
    #9 Carl Williams, Apr 13, 2019
    Sorted out the bars yesterday and managed a ride this morning, damn it feels better with the original handlebars on. Just need to sort out what I'm going to do with the flat bars now.
     
    • Like Like x 1
  10. Colin Drayton

    Colin Drayton New Member

    Oct 20, 2018
    13
    3
    England
    #10 Colin Drayton, Apr 15, 2019
    Hi, in what way does the bike ride different now you've got the standard one back on. I was considering putting some flat bars on mine to give it the cafe racer look. If you wanted to sell em I might be interested.
     
  11. Carl Williams

    Carl Williams Oooh, something shiny

    Mar 25, 2019
    37
    13
    Exeter, Devon, UK
    #11 Carl Williams, Apr 15, 2019
    I've never been a fan of low bars and putting the originals back on has made the bike more comfortable, it's only a inch or so but it makes all the difference as far as I'm concerned. I just feel more relaxed on the bike and that has obviously had an effect on how I feel riding.

    Not sure what the bars are worth so if you want them make me an offer.
     
    • Like Like x 1
  12. Colin Drayton

    Colin Drayton New Member

    Oct 20, 2018
    13
    3
    England
    #12 Colin Drayton, Apr 22, 2019
    Hi mate, it's into the unknown with the flat bar set up. Mine rides perfect with the original bars but I do like the look with flat bars. I'd give you £10 plus postage. Like you I might not even like them once there fitted. It's worth a try though if there cheap enough.
     
  13. Colin Drayton

    Colin Drayton New Member

    Oct 20, 2018
    13
    3
    England
    #13 Colin Drayton, Apr 22, 2019
     
  14. Colin Drayton

    Colin Drayton New Member

    Oct 20, 2018
    13
    3
    England
    #14 Colin Drayton, Jun 3, 2019
    Hi mate, did you get rid of those flat bars?
     
  15. Colin Drayton

    Colin Drayton New Member

    Oct 20, 2018
    13
    3
    England
    #15 Colin Drayton, Jun 3, 2019
    Hi mate did you get rid of those flat bars
     
Loading...
Similar Threads - Check Before Starting
  1. Nenad

    Adventurer 900 Oil Check

    Nenad, May 6, 2025, in forum: Thunderbird
    Replies:
    5
    Views:
    733
    joe mc donald
    May 16, 2025
  2. MightyBoosh

    Touring Cheeky Little Overnight Run Into Wales For Kit Check

    MightyBoosh, Apr 8, 2025, in forum: Rideouts, Trackdays, Touring & Spotted
    Replies:
    16
    Views:
    3,688
    MightyBoosh
    Apr 13, 2025
  3. glenn smith

    Check Engine Light Code P1685

    glenn smith, Jan 16, 2025, in forum: Speed Triple
    Replies:
    4
    Views:
    1,657
    glenn smith
    Feb 9, 2025
  4. rpg51

    2022 T100 First Valve Gap Check At 20k Miles?

    rpg51, Oct 15, 2024, in forum: Bonneville
    Replies:
    7
    Views:
    1,339
    nickjaxe
    Oct 22, 2024
  5. gazzatheyid

    Further Checks Needed?

    gazzatheyid, Aug 4, 2024, in forum: Technical Help
    Replies:
    11
    Views:
    973
    gazzatheyid
    Aug 5, 2024

Share This Page

Sign up