5ta Tensioner Mystery

Discussion in 'Triumph General Discussion' started by Phil mills, Feb 16, 2019.

  1. Phil mills

    Phil mills Well-Known Member

    Dec 29, 2018
    105
    68
    UK
    #1 Phil mills, Feb 16, 2019
    1961 5TA got her runnig a treat with the new dizzy, plugs, battery etc. She seemed a bit noisy on the primary chain, tried adjusting as per the manual bit with no success so I whipped the case off and to my surprise there is no chain tensioner?!! As far as I have research there should be one, its easy to buy on line but has anyone fitted one ?? I have the angles drain plug in the case not upright like early models so assume it missing
    All comments welcome
     
    • Agree Agree x 1
  2. Sprinter

    Sprinter Kinigit

    Aug 17, 2014
    5,993
    1,000
    uk
    #2 Sprinter, Feb 16, 2019
    • Agree Agree x 1
  3. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,650
    1,000
    Southcoast of the UK Earth
    #3 darkman, Feb 16, 2019
    I have never come across a unit 500 without one, do you have a pic from the side view.
     
    • Agree Agree x 1
  4. Phil mills

    Phil mills Well-Known Member

    Dec 29, 2018
    105
    68
    UK
    #4 Phil mills, Feb 17, 2019
    Morning and thanks for the reply here’s a couple of pics

    16CC9854-2742-48ED-BDEA-30806A6E47F4.jpeg

    9A9C2427-E73E-4D9B-965C-BEE89C2A86E1.jpeg

    1FA0A261-0F3A-4915-B94E-AF7F59D29220.jpeg

    500FA174-E2C9-4E14-9022-F44BF2A7AEEE.jpeg

    86ED4363-41F2-4FDD-B473-9DB9A1E3DECB.jpeg
     
    • Like Like x 2
  5. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,650
    1,000
    Southcoast of the UK Earth
    #5 darkman, Feb 17, 2019
    Morning Phil, if you look between the 2 lower mounting bolts of the alt there should be a threaded hole for the front pivot to screw into or it might even be there that's the front mount for the blade.
     
    • Like Like x 3
  6. Tricky-Dicky

    Tricky-Dicky Crème de la Crème

    Dec 12, 2016
    2,441
    1,000
    Norfolk UK
    #6 Tricky-Dicky, Feb 17, 2019
    Looks like someone has welded up the mount/adjuster hole to me.
     
    • Agree Agree x 2
  7. Phil mills

    Phil mills Well-Known Member

    Dec 29, 2018
    105
    68
    UK
    #7 Phil mills, Feb 17, 2019
    That’s not good news if something has been welded up! I will take another look now. It seems that the previous owner was a proper badger which is a pain.
     
    • Agree Agree x 1
  8. Phil mills

    Phil mills Well-Known Member

    Dec 29, 2018
    105
    68
    UK
    #8 Phil mills, Feb 17, 2019
    Heees a few pics closer, it does not look welded more original if that’s possible?

    A0FC7E8C-04FF-4487-857B-BD939FC17526.jpeg

    F59A8FEA-5FC3-47C9-B152-4DCC38C86D96.jpeg

    5CEA6FDB-0519-4B46-91CC-67AC241B6793.jpeg

    0EFF654F-BFE3-462D-B7AB-03081692CC6C.jpeg

    0551EBF8-ADAD-4BE5-A170-F7655A82A89A.jpeg
     
    • Like Like x 2
  9. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,650
    1,000
    Southcoast of the UK Earth
    #9 darkman, Feb 17, 2019
    Ignore the lug at the bottom, up behind the alt between the 2 lower of the 3 alt bolt there is either a hole for the pivot or the the pivot might even be there, that is the front pivot for the blade. Have sent a PM
     
    • Like Like x 2
    • Agree Agree x 1
  10. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,650
    1,000
    Southcoast of the UK Earth
    #10 darkman, Feb 17, 2019
    Pic shows num 16 front blade pivot, screws into the lower middle hole. 8c6c06313e8957414b1175db59943c38.jpg
     
    • Like Like x 2
  11. Phil mills

    Phil mills Well-Known Member

    Dec 29, 2018
    105
    68
    UK
    #11 Phil mills, Feb 17, 2019
    I will go and check now, thanks for all the help
     
    • Like Like x 2
    • Agree Agree x 1
  12. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,650
    1,000
    Southcoast of the UK Earth
    #12 darkman, Feb 17, 2019
    Not a 500 but shows how all parts work. Only difference is on 500's you put the long adjuster nut in after fitting the outer case. 732798aa8fcafd66ba2ebbf24f003cbc.jpg
     
    • Like Like x 4
  13. Phil mills

    Phil mills Well-Known Member

    Dec 29, 2018
    105
    68
    UK
    #13 Phil mills, Feb 17, 2019
    Thanks for the PM I will take advantage later as I have to pop out soon. I can’t see and hole in the casing or where I would expecting to see it my engine No is H8743 stamped 6ta

    4ABDE6FB-C96A-4696-8909-4C8C87A2541A.jpeg

    5F4C6789-2397-4F3D-9A7A-22E047EA8191.jpeg

    CFDF5EE1-CBCC-4AAD-866E-4638ED10057E.jpeg
     
    • Like Like x 2
  14. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,650
    1,000
    Southcoast of the UK Earth
    #14 darkman, Feb 17, 2019
    In the second pic you can see the threaded hole in the crankcase for the pivot to fit in if you look right through the alt :)
     
    • Like Like x 3
    • Agree Agree x 1
  15. Phil mills

    Phil mills Well-Known Member

    Dec 29, 2018
    105
    68
    UK
    #15 Phil mills, Feb 17, 2019
    Brilliant thank you I will havea better look when back home
     
    • Agree Agree x 1
  16. Phil mills

    Phil mills Well-Known Member

    Dec 29, 2018
    105
    68
    UK
    #16 Phil mills, Feb 23, 2019
    Glad to report new tensioner fitted, took her for a spin and it’s flipping marvellous, great weather and a great bike now.
    Thank you all for your help and support
     
    • Like Like x 5
    • Agree Agree x 1
  17. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,650
    1,000
    Southcoast of the UK Earth
    #17 darkman, Feb 23, 2019
    Great news :)
     
    • Like Like x 2
    • Agree Agree x 1
  18. Phil mills

    Phil mills Well-Known Member

    Dec 29, 2018
    105
    68
    UK
    #18 Phil mills, Feb 24, 2019
    Yes massive thumbs up
     
    • Like Like x 1
    • Agree Agree x 1
  19. Yarra

    Yarra New Member

    Jan 2, 2022
    6
    3
    Coventry
    #19 Yarra, Jan 2, 2022
     
    • Agree Agree x 1
Loading...
Similar Threads - 5ta Tensioner Mystery
  1. KeithTween

    Speed Twin 5ta Gearbox Problem

    KeithTween, Mar 25, 2024, in forum: Technical Help
    Replies:
    2
    Views:
    540
    darkman
    Mar 31, 2024
  2. Phil mills

    1961 5ta For Sale

    Phil mills, Jun 28, 2019, in forum: Vintage Classics
    Replies:
    16
    Views:
    2,504
    Phil mills
    Jul 13, 2019
  3. Phil mills

    1961 5ta Shake Down

    Phil mills, Mar 2, 2019, in forum: Triumph General Discussion
    Replies:
    10
    Views:
    1,309
    Phil mills
    Mar 12, 2019
  4. black sid

    3/5ta Rebuild

    black sid, Jul 30, 2017, in forum: Triumph General Discussion
    Replies:
    7
    Views:
    2,642
    black sid
    Jul 31, 2017
  5. Rocky2010

    1962 Triumph 5TA Distributor

    Rocky2010, Mar 20, 2015, in forum: Vintage Classics
    Replies:
    3
    Views:
    1,875
    Rocky2010
    Mar 20, 2015

Share This Page

Sign up