Featured Another Crk 900 Build...yay

Discussion in 'Builds & Projects' started by Vecchio lupo, Jan 7, 2019.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. Vecchio lupo

    Vecchio lupo Senior Member

    Oct 28, 2018
    411
    113
    Stuttgart
    OK friends, this is my first real thread on the forum, yes, Ive asked the odd question and I've piggybacked on others issues, but this is my CRK, there are many like; it but this one is mine.

    Im American so do your worst, or since I'm in Germany maybe I should say your Wurst. I do have some experience on builds but not for many years and not on a T300. My Bonnie 790 was not up to fully laden long distance touring, so I sold her (instant regret) and found a low mileage 2001 Sprint ST with bags and stuff, I found that I loved the triple, way more than I thought I would. I went everywhere on that bike, Scotland, Wales, Channel Islands, Italy, Czech republic and France, I ate up some tires and that bike took it in stride. Then she was stolen in Birmingham UK. I decided I wanted another and a friend recommended CRK as a possible. What??? Yes Please, I decided that was it, I searched for a cheap start point and found a 96 Sprint 900 with 36k Kilometers, so what 22k miles? I posted a pic here or maybe the facebook CRK page. nothing special stock but dirty unloved and only 700 euro.

    I ordered my kit from Ian and the book arrived. I began the teardown. Here are some pics.

    IMG_0262.jpeg

    IMG_0263.jpeg

    IMG_0264.jpeg
     
    • Like Like x 12
  2. Sprinter

    Sprinter Kinigit

    Aug 17, 2014
    6,026
    1,000
    uk
    I look forward to seeing your progress, good luck.
     
    • Agree Agree x 1
  3. Vecchio lupo

    Vecchio lupo Senior Member

    Oct 28, 2018
    411
    113
    Stuttgart
    #3 Vecchio lupo, Jan 7, 2019
    Last edited: Jan 7, 2019
    Thanks, I will post photos and we will make decent progress because Ive committed to a Normandy trip for the D-Day Anniversary . Plenty of time but no dilly dally. Having said that, I will be on holiday with the wife for the next 15 days, part of the price one pays to be able to build and spend.

    I have purchased a NOS Motad 3 into 1 exhaust system and have sent it off to America for Jet Hot Ceramic coating inside and out. My Bonnie had the inside and out Jet Hot and it looked great with no maintenance to speak of.

    After the tear down, I had a cup of coffee and just let her talk to me. I will discuss paint scheme ideas later. BTW Im working in a detached garage with a Halogen lamp, a small space heater and two kerosene lanterns (for the heat they put out) its not too bad. The PO said she was running really bad( see photo 2), I purchased on the fact she had compression and spark.

    EDIT: I see where the wires are correct, I thought I found a Duh moment. I suppose the terrible running will be the carbs

    IMG_0273.jpeg

    IMG_0270.jpeg

    IMG_0268.jpeg
     
    • Like Like x 5
  4. Sprinter

    Sprinter Kinigit

    Aug 17, 2014
    6,026
    1,000
    uk
    Ive got no power, and rechargeable torches, and its still my favourite place.
     
    • Like Like x 2
    • Agree Agree x 1
  5. Vecchio lupo

    Vecchio lupo Senior Member

    Oct 28, 2018
    411
    113
    Stuttgart
    Damn, you are my Hero
     
    • Funny Funny x 2
    • Agree Agree x 1
  6. dilligaf

    dilligaf Guest

    Keep the pictures coming mate :cool:
    I love these bike re-births :)
     
    • Agree Agree x 6
  7. Vecchio lupo

    Vecchio lupo Senior Member

    Oct 28, 2018
    411
    113
    Stuttgart
    #7 Vecchio lupo, Jan 8, 2019
    Last edited: Feb 24, 2019
    Another few hours spent in a noble pursuit. Funny but I noticed all the fasteners are metric (as expected) except the hydraulic line fittings, they were 9/16 SAE See photo 1. It reminded me back in my teenage criminal days when after butchering my BSA A65 with standard/metric mixed bag and still having issues, the nice older gentleman down the street with an Austin Healy asked me if I had any "Whitworth" tools.

    What??/ there are only metric and standard right? Live and learn. Yes I was a BSA guy because we had a big BSA dealer right up to the end and the city was flooded with bikes in sheds that didn't run by the mid 1970s. I was broke so, free bikes or I'll paint your house for that old bike in the garage. One day I finagled a Norton and left BSA forever.

    I drained the coolant and was very happy with the condition at first, then it turned sickly rust brown. No worries I shall cleanse.

    IMG_0276.jpeg

    IMG_0283.jpeg

    IMG_0284.jpeg
     
    • Like Like x 3
  8. Vecchio lupo

    Vecchio lupo Senior Member

    Oct 28, 2018
    411
    113
    Stuttgart
    After I dropped the exhaust and got a real close look at everything, I noticed a whole lot of silicone squished out of almost everywhere, since the factory didn't do that I wonder if it had a sprag problem and somebody had to open her up. I'll change almost all the gaskets anyway as Im doing an engine out restoration/modification. There will be a small amount of powder coated accents. Even the exhaust had silicone...yuck.

    Ive done almost all the easy stuff now.

    IMG_0290.jpeg

    IMG_0286.jpeg

    IMG_0289.jpeg

    IMG_0293.jpeg
     
    • Like Like x 3
  9. Vecchio lupo

    Vecchio lupo Senior Member

    Oct 28, 2018
    411
    113
    Stuttgart
    As I write the third and final entry today, I leave my shop knowing I have work to do and that makes me nuts. I have too much to do over the next 3 days before we go on holiday so I won't post for at least two weeks except maybe a pic of me being miserable at some stupid tourist attraction when Id rather be dirty and cold in my shed, like all of us. The second photo is the offending member.

    IMG_0295.jpeg

    IMG_0294.jpeg
     
    • Like Like x 4
  10. Sprinter

    Sprinter Kinigit

    Aug 17, 2014
    6,026
    1,000
    uk
    The silicon could be just exhausts off for some reason and valve timings by the photos.
     
    • Thanks Thanks x 1
    • Agree Agree x 1
  11. Vecchio lupo

    Vecchio lupo Senior Member

    Oct 28, 2018
    411
    113
    Stuttgart
    I would hope but photo 3, the one below the exhaust is the engine case

    Thats what happened when you got no history. No matter, she spins, she compresses, and she sparks. She will run.
     
    • Like Like x 2
    • Agree Agree x 1
  12. Tim Schultz

    Tim Schultz Well-Known Member

    Sep 7, 2017
    236
    83
    Sioux Falls, SD
    Good luck with the project. I believe you have a good base.
    Brought my 96 Sprint 22 years ago, 50K miles, coast to coast to coast and lots of carving in the twisty's. Bike and engine are bullet proof. Now sharing time with my other ride a 06 BMW K1200S that I got this late summer.
    Have fun Spring 2018 Covell Lake SFSD.JPG
     
    • Like Like x 7
  13. Vecchio lupo

    Vecchio lupo Senior Member

    Oct 28, 2018
    411
    113
    Stuttgart
    Nice Ride, Ive never been to the Plains, upon my return to the States I plan a whole northern tour all the way to The Pacific NW. I've been just about everywhere else.

    while I've got you. Whats your thoughts on dropping a tooth on the front sprocket since now as a naked, short range (14 litres) bike, the Top speed, relaxed hi way cruise RPM is not so important. Unless people have done it and the mod makes everything to short and buzzy.
     
    • Agree Agree x 1
  14. John Mac

    John Mac New Member

    Sep 26, 2018
    4
    3
    Jersey
    Hi bud,

    Increase one on the front, better acceleration racing style
     
    • Agree Agree x 1
  15. Oldyam

    Oldyam Grumpy Old Git

    May 14, 2017
    613
    500
    ireland
    Going UP one on the front will lower the revs and make for less acceleration and raise the max possible if it will rev out. However it would be wise to check what is already fitted before making too many changesand then decide which is the best option as too small a front sprocket will cause the chain to eat into the swing arm and too large a rear sprocket could cause clearance issues on other components ie chain guard.
     
    • Agree Agree x 5
    • Like Like x 3
  16. Vecchio lupo

    Vecchio lupo Senior Member

    Oct 28, 2018
    411
    113
    Stuttgart
    Thank you, of course I was basing my thoughts on the stock gearing. I failed to mention that the rear sprocket is on the edge of serviceable and the chain is nasty.

    Since new sprockets and chain is going to happen, now is my chance to hear from more experienced techs than myself
     
    • Like Like x 1
    • Agree Agree x 1
  17. Oldyam

    Oldyam Grumpy Old Git

    May 14, 2017
    613
    500
    ireland
    Of course but unless you know what you have fitted now its difficult to advise on the best options you may have, a previous owner may have already changed the gearing to give more mpg at the expense of performance.

    Also changing the front sprocket means a new gasket and draining the oil everytime you access it, maybe even an longer chain fitted.
     
    • Agree Agree x 2
    • Like Like x 1
  18. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,358
    800
    Nr Biggar
    That, my friend, is like a British Boomer as you might call it. Metric at the bow, metric at the stern and good ol’ Imperial in the middle where made by a Uncle Sam!
    upload_2019-1-11_16-43-44.jpeg
     
    • Like Like x 2
  19. Vecchio lupo

    Vecchio lupo Senior Member

    Oct 28, 2018
    411
    113
    Stuttgart
    Did I mention I have never ridden this bike or even heard the engine run? I am starting at zero with a full tear down and inspection prior to making any parts orders.
     
    • Useful Useful x 1
  20. Callumity

    Callumity Elite Member

    Feb 25, 2017
    3,358
    800
    Nr Biggar
    So you won’t be disappointed then........:)
     
    • Agree Agree x 1
Loading...

Share This Page