1976 T140V does the oil in frame breather vent up at the neck connect with the primary crankcase breather (T- piece ) before being vented to back of rear mud guard? Can't find any definitive info or picture on this.
Breather pipe 83-7154 goes from frame down to T piece 83-1610 that goes on the large rear breather pipe
Hey darken, just got a Lucas 2 pin ignition switch, 2 pins 2 terminals on each, but no markings/labels. How can I tell which is battery and which is for Pazon electronic ignition. All pins look the same.
Not my best subject lol, use a battery and 2 wires with a bulb in one wire to feed one pin at a time with key in off pos then see if others become live when turning key would be one way and make notes lol
Ok, put power to one pin and see if the other is hot. If not reverse. I think that's what you mean...Thx.
Yes live wire to pin and wire with bulb on other pin, using the key on off function will tell you how it's switched
It worked, in fact both ways, so I guess you can choose the one you want for power in, and the other becomes power out.
It's starting to look like a bike. Still waiting for the jugs and head to come back from the machinist, but using the time to do some painting and to try and figure out electricity and wiring ...Brake,taillights, and flashers working, yippie!