Tec Centre Stand

Discussion in 'America, Speedmaster & Rocket' started by BykerBry, Jan 20, 2018.

  1. BykerBry

    BykerBry Well-Known Member

    Aug 8, 2017
    104
    93
    Reading, Berkshire
    #1 BykerBry, Jan 20, 2018
    Has anyone fitted a TEC Centre Stand to a Speedmaster? I have just bought and fitted one. All very straightforward but it is very hard to lift onto the stand and it is easily pushed forward when I do eventually sum up enough strength to get it onto the stand.
    Instructions say to file off some metal from the stops which I have done twice and while there is an improvement it can still be pushed lightly from the rear and will come off the stand.
    How much more do I need to file off? Any experiences anyone??
     
  2. dilligaf

    dilligaf Guest

    #2 dilligaf, Jan 20, 2018
    Hi mate
    I fitted one to mine :)
    Had to remove it twice to file it until I was happy with it :confused:
    If you need to take more off then that’s what you’ll have to do if you’re not happy with it :(
    It is the worst bike I’ve ever had to get it on the centre stand :( but it gets easier with practice :)
    I keep meaning to remove mine and weld on a bigger foot pad because it’s too small and hurts my foot even through thick soled motorcycle boots :(
     
  3. TEZ 217

    TEZ 217 Crème de la Crème

    Mar 6, 2016
    3,154
    1,000
    south shields
    #3 TEZ 217, Jan 20, 2018
    AAHAA Me feels another Dilligaf BIG Build on the way !!!!
    I can't wait marra ;);):D
     
  4. dilligaf

    dilligaf Guest

    #4 dilligaf, Jan 20, 2018
    Don’t hold your breath mate :(
    The centre stand was one of the first things I did to my BPOS and it just keeps getting forgotten about :confused:
     
    • Like Like x 1
  5. OsteKuste

    OsteKuste Intergalactic Warlord
    Subscriber

    Oct 22, 2017
    2,198
    943
    Tennessee, United States
    #5 OsteKuste, Jan 20, 2018
    I debated on fitting a center stand to my bike, but decided since the street cup has the option to use bobbins through the axle (tec kit) I went that route. I hope I don’t regret not getting the center stand.
     
  6. BykerBry

    BykerBry Well-Known Member

    Aug 8, 2017
    104
    93
    Reading, Berkshire
    #6 BykerBry, Jan 20, 2018

    Hi Dilligaf, nice to hear someone else had the same trouble . Terrible design so maybe that’s why they are cheap.
    I have removed it twice to file away so I will try again and hope I can’t take too much off.
    It is a pig to lift up as well. Found the Bonnie was tricky at first but have got the knack now so hopefully the Speedy will work out the same.
    Thanks for your input.
     
    • Like Like x 1
  7. BykerBry

    BykerBry Well-Known Member

    Aug 8, 2017
    104
    93
    Reading, Berkshire
    #7 BykerBry, Jan 20, 2018

    Cruiser stands are great at home but a centre stand is the only way when you are out and about. But if they don’t hold the bike then they are a total disaster.
     
  8. dilligaf

    dilligaf Guest

    #8 dilligaf, Jan 21, 2018
    The Tec centre stand came with a lifting handle mate :)
    I mostly use the centre stand when my bike is on the lifting bench in my garage :) not a lot of room for error:confused:
    I can get it on the centre stand ok...it’s just that it’s the worst bike I’ve had to do this :eek:
     
    • Informative Informative x 1
  9. Older Rider

    Older Rider New Member

    Aug 16, 2022
    0
    1
    Lincolnshire
    #9 Older Rider, Oct 5, 2022
     
  10. Older Rider

    Older Rider New Member

    Aug 16, 2022
    0
    1
    Lincolnshire
    #10 Older Rider, Oct 5, 2022
    TecBike told me they do not produce a centre stand for a Speedmaster, did they ever produce one for this Triumph, they also do not produce progressive fork springs for the Speedmaster?
     
Loading...
Similar Threads - Tec Centre Stand
  1. Adrian Williams

    2021 Triumph T100 & Tec Centre Stand

    Adrian Williams, Dec 1, 2021, in forum: Technical Help
    Replies:
    2
    Views:
    1,368
    Jim Lane
    May 8, 2022
  2. Clarkey231

    Vintage Tiger Sw Motech Centre Stand

    Clarkey231, Mar 14, 2021, in forum: Tiger / Explorer
    Replies:
    2
    Views:
    1,432
    Clarkey231
    Mar 27, 2021
  3. DorsetFox

    Centre Stand Onto Se With 2-1 Tec 'tracker' Exhaust

    DorsetFox, Jun 18, 2020, in forum: Bonneville
    Replies:
    3
    Views:
    1,168
    DorsetFox
    Jun 23, 2020
  4. Ian G

    Thruxton Tec. Centre Stand

    Ian G, Mar 22, 2020, in forum: Thruxton, Scrambler & Trident
    Replies:
    2
    Views:
    1,315
    Ian G
    Mar 22, 2020
  5. Samuel F

    Bonnie T100, Tec Centre Stand & Custom Exhausts

    Samuel F, Feb 8, 2020, in forum: Technical Help
    Replies:
    7
    Views:
    2,826
    Samuel F
    Mar 5, 2020

Share This Page

Sign up