Winter Survival

Try Scottoiler FS365

 

I've used ACF50 on our three bikes, all since new. Two are used in all weathers (gritted roads) and they're immaculate. I operate a weekly cleaning routine (which I actually enjoy) to keep them in good condition and honestly...they're showroom clean.

Spraying it all over results in a residue that attracts the dirt - with the approach that you wipe it off after the winter. What's worked for me, is applying ACF50 to a microfibre cloth, before working it over the bike. I use a paintbrush to work it into difficult areas - and very little product is needed to flow into all the nooks and crannies by itself. The cloth becomes damp and impregnated with the ACF50 and I keep it in a sealed plastic food bag, ready for next use.

I use it as an LSP (that's a Last Step Product in detailing speak) and it brings up the engine parts, exhaust, frame and plastics like nothing else I've tried. I avoid the paintwork, together with grips, levers, pegs, brakes, tyres etc for obvious reasons.

For anything gloss (paint, mirrors, headlamp lenses and especially gloss carbon), Chemical Guys Hybrid V7 Spray Gloss Sealant is superb (it fills/hides light swirl marks too).

For matt paintwork, Chemical Guys Meticulous Matte Detailer is the answer. I use this on our phantom matt black Daytona and on my grey Triple and it removes all manner of finger, drying and insect marks, and leaves a protective coating that beads and repels water. It even brings up the rubber tank protector and hides the scuffs.

OK...maybe it's regular cleaning, time and devotion, that is really doing the trick, but the combination definitely works for me. If you're looking to follow the 'quick and literally dirty' method of just spraying ACF50 all over, then I guess there are other products that are cleaner to use.

 

Dedication!

 

That's the name of the game....if you wanna be a record breaker

 

All this is worthless without a couple of pictures...so I just popped out to the garage

The Daytona has been subjected to two years of all-weather riding and has covered 10,000 miles. My Speed is mostly dry weather and less than 4,000 miles. The headers got a bit spotted, but Cillit Bang (really) followed by ACF50 reversed the rust spots.

I'll try to keep quiet about cleaning now

 

I'm not the only sad bastard on here then!
Though scanning those pics..... think I need to up my game a smidgen.

 

I'm told it's not at all sad...more like tragic

But it makes me happy...right?

 

Whoop whoop !