Which Slip On Cans

Discussion in 'Speed Triple' started by Rubberhamster, Aug 7, 2017.

Page 1 of 2
  1. Rubberhamster

    Rubberhamster New Member

    Jul 27, 2017
    14
    3
    Labrador retriever
    #1 Rubberhamster, Aug 7, 2017
    Evening all, looking at putting some new cans onto my 2016 Speed Triple R. What's the general consensus? Want something different so Arrows are out of the equation, looking at Akrapovics but they're a bit pricey, need helppppppppp.
     
  2. Modalconfusion

    Modalconfusion Active Member

    Jul 28, 2016
    211
    43
    Stafford
    #2 Modalconfusion, Aug 7, 2017
    I'm getting the scorpion low level can to get that weight down low and at £379 I didn't think it was too bad a price. Black widow would be a choice but they are gonna be another 6-8 weeks with a low level can. See if they do the high level cans cause I'm sure they would be the right price.
     
  3. Rubberhamster

    Rubberhamster New Member

    Jul 27, 2017
    14
    3
    Labrador retriever
    #3 Rubberhamster, Aug 7, 2017
    Thanks for that, I'm after a high level rather than the low version. Quite like the scorpion but have also looked at a few makes that I've never heard of. Wondered whether anyone had any experience of the smaller companies.
     
  4. Gled

    Gled Active Member

    Jul 25, 2017
    107
    43
    Manchester (UK)
    #4 Gled, Aug 7, 2017
    Hi Rubberhamster

    I've got the 2016+ S3R and went for the SC Projects carbon cans and I'm not disappointed. They look and sound great, much smaller and lighter than the stockers and all for £600 direct from the factory in Italy.

    The manufacturer says there's no need to remap with these but I put the Arrows map on to be on the safe side.

    Gled.

    IMG_20170725_123005.jpg
     
  5. Gled

    Gled Active Member

    Jul 25, 2017
    107
    43
    Manchester (UK)
    #5 Gled, Aug 7, 2017
    Check this out...



    Gled.
     
    • Like Like x 1
  6. chuk

    chuk Senior Member
    Subscriber

    Jan 10, 2017
    349
    113
    neilston glasgow
    #5 chuk, Aug 7, 2017
    where do they sell for less than £400 if you don't mind
     
  7. Rubberhamster

    Rubberhamster New Member

    Jul 27, 2017
    14
    3
    Labrador retriever
    #6 Rubberhamster, Aug 8, 2017
    Excellent , I was looking at those as they seemed to have good reviews and were about the mark that I wanted to pay. My only concern was that there wasn't a UK distributor but the vid made my mind up (I think)
     
  8. Gled

    Gled Active Member

    Jul 25, 2017
    107
    43
    Manchester (UK)
    #7 Gled, Aug 8, 2017
    I ordered directly from the manufacturer's website. Took about 2 weeks to arrive.

    http://www.sc-project.com/triumph_speed_triple_2016_e.htm

    Gled.
     
  9. Rubberhamster

    Rubberhamster New Member

    Jul 27, 2017
    14
    3
    Labrador retriever
    #7 Rubberhamster, Aug 8, 2017
    • Like Like x 1
  10. Rubberhamster

    Rubberhamster New Member

    Jul 27, 2017
    14
    3
    Labrador retriever
    #8 Rubberhamster, Aug 8, 2017
  11. chuk

    chuk Senior Member
    Subscriber

    Jan 10, 2017
    349
    113
    neilston glasgow
    #9 chuk, Aug 8, 2017
    that seems great but do you also have to buy the link pipe shown in pic as that adds another nearly £200 to price for system.
     
  12. Gled

    Gled Active Member

    Jul 25, 2017
    107
    43
    Manchester (UK)
    #10 Gled, Aug 9, 2017
  13. chuk

    chuk Senior Member
    Subscriber

    Jan 10, 2017
    349
    113
    neilston glasgow
    #11 chuk, Aug 11, 2017
    would these fit 2011 model
     
  14. chuk

    chuk Senior Member
    Subscriber

    Jan 10, 2017
    349
    113
    neilston glasgow
    #12 chuk, Aug 11, 2017
    good stuff appreciated
     
  15. Rubberhamster

    Rubberhamster New Member

    Jul 27, 2017
    14
    3
    Labrador retriever
    #12 Rubberhamster, Aug 16, 2017
    Well I've only gone and done it, completely ignored everyone's advise (including my own) and ordered a pair of Akrapovics.
    Next job is to take delivery and fit them before my wife gets home
    Thanks again for all the replies and if anyone wants any info on them give me a shout. Got a pretty sweet deal with 0% finance.
     
    • Like Like x 1
  16. Gled

    Gled Active Member

    Jul 25, 2017
    107
    43
    Manchester (UK)
    #13 Gled, Aug 16, 2017
    Good choice mate,

    Post up some pics when you get them fitted.

    Gled.
     
  17. Rubberhamster

    Rubberhamster New Member

    Jul 27, 2017
    14
    3
    Labrador retriever
    #14 Rubberhamster, Aug 16, 2017
    Will do, just don't show the wife
     
    • Funny Funny x 1
  18. Bomber

    Bomber Member

    Aug 4, 2017
    5
    8
    London
    #14 Bomber, Aug 16, 2017
    Do they do a version for the 2016/17 model or does the 2015 one line up exactly?
     
  19. Rubberhamster

    Rubberhamster New Member

    Jul 27, 2017
    14
    3
    Labrador retriever
    #15 Rubberhamster, Aug 16, 2017
    My bike is a 2016 and according to the website, Performance Parts Ltd, they fit the following.

    This fits:
    Triumph Speed Triple 1050, from 2011 onwards
    Triumph Speed Triple 1050R, from 2011 onwards
    Triumph Speed Triple 1050S, from 2016 onwards

    Hope that helps
     
    • Like Like x 1
  20. Rubberhamster

    Rubberhamster New Member

    Jul 27, 2017
    14
    3
    Labrador retriever
    #16 Rubberhamster, Aug 19, 2017
    Settled into my garage routine of pizza and beer and spent the next four hours fitting the system. I'm not the most mechanically minded person out there but feel I can do most jobs when I put my mind to it. The cans, link pipes and brackets were all
    pretty easy to fit, the time was sucked up with removing & replacing plastic, and messing around with nuts that really didn't want to go in the places they were supposed to. I cannot say enough about the quality of the Akrapovic system, the cans, brackets, springs and even the tube of copper grease were all top notch. Clear and precise instruction and packaging that I'm now forwarding to The Tower of London for the Crown Jewels. Baffles are out and after taking it for a spin this afternoon I'm very impressed with the sweet tones coming from the system, not too in your face but enough to put a smile on yours and a few gentlemen when I pulled in for petrol.
    Will post a few pictures tomorrow after a ride out to Cadwell. Will definitely use Performance Parts again, fantastic price and service.
     
    • Like Like x 3
  21. Gled

    Gled Active Member

    Jul 25, 2017
    107
    43
    Manchester (UK)
    #16 Gled, Aug 19, 2017
    Glad you like em. Looking forward to seeing the pics.

    Gled
     
  22. Bomber

    Bomber Member

    Aug 4, 2017
    5
    8
    London
    #17 Bomber, Aug 20, 2017
    They sound great sufficiently louder than the stock without being as mad as the Werx single cans I have had, just loud enough on tick over, and a nice growl when accelerating and a lot more popping on deceleration. Not sure if there is any significant gain in power but pulls nicely in all gears with no nasty surprises throughout the rev range. Really pleased with quality fit and looks. Now to sort out the tail tidy and a single light unit for the brake and indicators.

    IMG_7123.JPG

    IMG_7124.JPG

    IMG_7125.JPG

    IMG_7126.JPG

    IMG_7132.JPG
     
    • Like Like x 3
  23. Bomber

    Bomber Member

    Aug 4, 2017
    5
    8
    London
    #18 Bomber, Aug 20, 2017
    Hopefully I won't be waking up the dead with these. Need some time on the dyno to see what it's actually putting out. Had my previous one re mapped and it was far better than the stock map, but this seems spot on although it's early doors and haven't tested every rider mode yet but all good in the Sports and rider mode where I have traction turned off.
     
  24. Bomber

    Bomber Member

    Aug 4, 2017
    5
    8
    London
    #19 Bomber, Aug 20, 2017
    No I haven't used hilltop. Used to have a great local dyno but they are now defunct,
    Have a chat and get some prices from T3 and BSD, I have had work done by both of them on Triumphs and my Kawasaki ZZR1400 was mad enough for power but felt awful at low revs and in town, well sorted after a remap and dyno runs.
    If your bike is still in warranty a remap will most likely invalidate it.

    https://www.t3-racing.co.uk/pages/motorbike-engine-tuning-dyno-testing-fuel-map

    http://bsd.uk.com/
     
    • Like Like x 1
  25. Modalconfusion

    Modalconfusion Active Member

    Jul 28, 2016
    211
    43
    Stafford
    #20 Modalconfusion, Aug 24, 2017
    Just gotta get the carbon rear hugger fitted and the evotech tail tidy when they arrive

    IMG_6595.JPG
     
    • Like Like x 5
Page 1 of 2
Loading...
Similar Threads - Slip Cans
  1. punchy

    Slip On End Cans For T/bird 900 96reg

    punchy, Apr 25, 2018, in forum: Technical Help
    Replies:
    5
    Views:
    914
    punchy
    Apr 30, 2018
  2. Midge

    Pipewerx Stainless Steel Oval Slip on End cans for sale

    Midge, Jun 7, 2013, in forum: Parts, Accessories & Clothing
    Replies:
    2
    Views:
    1,155
    Midge
    Jun 9, 2013
  3. dav.a

    Speed Triple 1200 Prorace Titanium Slipon Exhaust.sold

    dav.a, Aug 11, 2025, in forum: Parts, Accessories & Clothing
    Replies:
    0
    Views:
    302
    dav.a
    Aug 11, 2025
  4. neil horsfall

    Tor Slip On Silencers For Ac T100 Bonneville

    neil horsfall, Jul 8, 2025, in forum: Parts, Accessories & Clothing
    Replies:
    1
    Views:
    502
    neil horsfall
    Jul 11, 2025
  5. Woodtickgreg

    British Customs New Shortie Slip Ons.

    Woodtickgreg, Mar 19, 2025, in forum: Bonneville
    Replies:
    7
    Views:
    1,313
    RevPaul
    Jun 3, 2025

Share This Page

Sign up