675 Street Triple R Engine Light On

I've got a 2011 Striple 675 R.

When I turn the bike to 'on' before 'ignite' all the check lights come on and then turn off except the 'check engine light'.... the light immediately disappears when I turn the key to ignition and run the engine.

The only thing that has changed in the bike is that my friend rode my bike and when he came to a stand-still he nearly dropped it on its side. We caught it before it hit the deck but other than that there's been nothing I can think of and now the check engine light is staying lit when the key is turned to 'on'?!

Please help

Thanks

 

Could be the tilt switch, have you done 3 cycles- start run to hot stop let cold- this resets eml if nothing wrong

https://www.thetriumphforum.com/threads/tunecu-what-all-you-need-to-know.9582/#post-115916

 

I've made 4 journeys since then but two of those were paricularly short (5 mins or so) so I'm not sure it'd quite count. Is it supposed to be 3 heat cycles in a row as in on the same day?

I've read in other threads that turning the bike on/off 3 times over a few seconds in succession has worked for others??

Thanks

 

It would depend if the bike cooled between rides, look at the ecu tune website would be my advice mate.

 

I'll give it another full whack ride and see if it changes anything. Thanks for the tips pal

 

Same thing is happening now after my bike dropped following a light accident a month ago

 

Does a trip switch need reset?

 

I understand it's 3 cycles, from cold up to temp and back to cold. Time elapsed is probably irrelevant.