Bike won't start...

Discussion in 'Technical Help' started by nicetown, Apr 19, 2017.

Page 2 of 4
  1. dilligaf

    dilligaf Guest

    #21 dilligaf, Apr 21, 2017
    Hi mate
    You're back to the original fuel problem now
    However your gonna need to keep the battery charged otherwise you'll not get anywhere
    I don't know if ther could be a fault showing on your bike because like my bike the engine management light is on until the engine is running
    You could be showing a fault that needs clearing after you ran out of fuel
    This fault might be to protect the fuel pump so it doesn't run when it's dry!
    Gonna have to get a OBD reader to clear fault
    Dunno if the TUNE ECU Can do this or not
     
  2. thebiglad

    thebiglad Old fart, still riding !

    Sep 25, 2013
    5,068
    1,000
    Central France
    #22 thebiglad, Apr 21, 2017
    Hi Nicetown, can you hear the pump priming? If not the first place I would check is the fuel pump relay. Another member has recently found that dirty contacts on this relay stopped his pump working.
     
    • Like Like x 1
  3. nicetown

    nicetown Member

    Jan 15, 2017
    21
    8
    London
    #23 nicetown, Apr 21, 2017
    I think that Tune ECU can clear faults, and no fault appeared on my diagnosis...

    I cannot hear the pump priming, I will remove the tank and check the relay, thanks !
     
    • Like Like x 1
  4. Rooster

    Rooster Grumpy Member
    Subscriber

    Sep 14, 2015
    1,662
    800
    Droitwich, Worcestershire
    #24 Rooster, Apr 21, 2017
    Kill switch on?
     
    • Like Like x 1
  5. nicetown

    nicetown Member

    Jan 15, 2017
    21
    8
    London
    #25 nicetown, Apr 21, 2017
    yes
     
  6. nicetown

    nicetown Member

    Jan 15, 2017
    21
    8
    London
    #26 nicetown, Apr 21, 2017
    Stupid question : should the fuel pump prime with the sidestsand down ?
     
  7. thebiglad

    thebiglad Old fart, still riding !

    Sep 25, 2013
    5,068
    1,000
    Central France
    #27 thebiglad, Apr 21, 2017
    Yes mate, it's been a while since I had my Bonny but I'm 95% sure it should.

    In any case, why not try both - you're only trying to establish if the pump is pumping as part of diagnosis, after all.
     
    • Like Like x 1
  8. crispey

    crispey crispey creme de la creme

    Nov 6, 2014
    7,248
    1,000
    Uk
    #28 crispey, Apr 21, 2017
    Yeah it should prime with or without side stand down
     
    • Like Like x 2
  9. dilligaf

    dilligaf Guest

    #29 dilligaf, Apr 22, 2017
    Hi mate
    You got it going yet?
     
  10. nicetown

    nicetown Member

    Jan 15, 2017
    21
    8
    London
    #30 nicetown, Apr 24, 2017
    I will try this evening, with a fully charged battery..
     
    • Like Like x 1
  11. dilligaf

    dilligaf Guest

    #31 dilligaf, Apr 24, 2017
    Fingers crossed for you mate
     
  12. nicetown

    nicetown Member

    Jan 15, 2017
    21
    8
    London
    #32 nicetown, Apr 25, 2017
    I'm desperate... I have a trip on Saturday and the bike still doesn't work..
    I tested all the fuses, they work. Battery charged at 13.5V, with two new spark plugs, got a spark when I connect to the ground. Relay starter and sidestand switch by passed. Still no priming. I removed the tank but it started raining and I was in the street so I could not test the different things with the voltmeter.. The ignition cool had square bolts, could not remove them unfortunately.. So I could not test the continuity.
    I don't understand why it's not priming, should I remove the fuel pump ? I don't even know if I can do it with a fully filled tank..
     
  13. dilligaf

    dilligaf Guest

    #33 dilligaf, Apr 25, 2017
    Ok mate
    Here goes I have just spoken to Paul at my local triumph dealer he suggested disconnecting the battery for at least an hour
    That might right things

    Have you cleared faults using tune ECU or OBD reader

    If this doesn't work Paul thinks you may have damaged the pump
     
  14. nicetown

    nicetown Member

    Jan 15, 2017
    21
    8
    London
    #34 nicetown, Apr 25, 2017
    So nice of you, many thanks ! I did not find any fault using tune ECU last time, but at that time the engine was not cranking at all, I don't know if it could detect errors...
    I will try to disconnect the battery and try tune ECU again after that, thanks a lot
     
    • Like Like x 1
  15. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,230
    1,000
    North Yorkshire
    #35 steve lovatt, Apr 25, 2017
    Good luck!
     
    • Like Like x 1
  16. nicetown

    nicetown Member

    Jan 15, 2017
    21
    8
    London
    #36 nicetown, Apr 25, 2017
    Could not drain the fuel off with a hose, so I can't check the fuel pump :(
    I have 10.9v between the green and black wire, connecting the tank.. Nothing between the two other pins. And 2 ohms between the ignition coil. 5kohm on one lead and 7 on the other. I waited 1hour but still no priming. Tune ecu coming in a bit..
     
  17. dilligaf

    dilligaf Guest

    #37 dilligaf, Apr 25, 2017
    Still rooting for you mate!
    Wish you were closer and I would borrow my mates OBD reader and come round to yours
    I no nothing about TUNE ECU because I don't have it yet so can't help you with that one
    Washington is a canny hike to London!!!!
    Anyway I don't like shandy!!
     
    • Like Like x 3
  18. nicetown

    nicetown Member

    Jan 15, 2017
    21
    8
    London
    #38 nicetown, Apr 25, 2017
    Yes it's a bit far but thanks anyway ahah !

    [​IMG]

    It says no error, I tried the Fuel pump test and it says "No error code" as well..
     
  19. dilligaf

    dilligaf Guest

    #39 dilligaf, Apr 25, 2017
    Like I said mate I don't have this
    But in the bottom l/h corner SAI and main relay look to be lit up
    Does that mean a fault?
    I don't know
     
  20. nicetown

    nicetown Member

    Jan 15, 2017
    21
    8
    London
    #40 nicetown, Apr 25, 2017
    Apparently it does not mean a fault, I'll need to find another solution :(
     
    • Like Like x 1
Page 2 of 4
Loading...
Similar Threads - Bike won't start
  1. Karlum

    Bike Won't Start

    Karlum, May 29, 2025 at 8:08 PM, in forum: Technical Help
    Replies:
    2
    Views:
    178
    joe mc donald
    May 31, 2025 at 10:59 PM
  2. Mick62

    Bike Won't Start

    Mick62, Sep 28, 2024, in forum: Technical Help
    Replies:
    2
    Views:
    408
    sprintdave
    Oct 1, 2024
  3. Mick62

    Bike Won't Start

    Mick62, Sep 28, 2024, in forum: Triumph General Discussion
    Replies:
    2
    Views:
    974
    joe mc donald
    Oct 11, 2024
  4. IJH

    Bike Won't Start , Advice Needed.

    IJH, Oct 27, 2018, in forum: Technical Help
    Replies:
    21
    Views:
    3,720
    IJH
    Dec 4, 2018
  5. Simon narb

    Bike Won't Start

    Simon narb, Jul 9, 2018, in forum: Thunderbird
    Replies:
    6
    Views:
    2,608
    Simon narb
    Jul 9, 2018

Share This Page

Sign up