Front Wheel not central in forks

Have a bit of a problem .
Am fitting Daytona 955 front end etc to my Trophy 1200.
Now is bolted in, from front of bike the wheel is about 2-3mm off to the rightside of forks.
Not got calipers at moment as waiting to buy them so can see if they clear discs or scrape
Also add that its a Speed Triple 955 front wheel I`m using
Just wondered if anyone else has had this problem.
Can`t get pic at moment as camera is playing up but will upload asap.
Cheers

 

Complete front end , yokes, forks, wheel, discs, mudguard.
I had a thought if there was a difference in the size of the wheel spacer ?

 

Cheers JTD will give that a look, will also take some pics just in case someone sees something have done wrong.
Hopefully get pics later

 

here are some pics of alignment also condition of forks.
I did buy these cheap off e-bay and as shown is some scrape marks to sides. Bought them with a view to getting better set when can afford them. Then break these ones for p arts to sell

 

Post seems to have gone a bit funny

 

I think it is like darkman says once have calipers will be a bit wiser. Might just need, as t552says, the fork swiveling to get it to fit. If this happens then would indicate that fork is probably a bit bent. Just have to wait and see. Cheers for advice etc

 

Has lowered front of bike a bit, which in turn steepens head angle and with the fork centres closer to stem will reduce trail so should make the old girl steer a bit quicker. Can`t see any problems with that but once get on road will be able to see and let people know