Why you need to carry cable ties in your tool kit

Discussion in 'Triumph General Discussion' started by steve lovatt, Nov 26, 2015.

  1. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,242
    1,000
    North Yorkshire
    #1 steve lovatt, Nov 26, 2015
    This happened after I came off a motorway run and was on my way back home. Noticed that the top box looked odd in the rear view mirror and pulled over to find that the tail rack had sheared off on both sides! Only had a pair of waterproof trousers in there, so it -
    20151107_151125.jpg 20151107_151143.jpg
    - must have weakened over time. Luckily had two cable ties with me and so able to make it home intact.

    Problem is that the rack was an original and they just don't seem to be around for the Trident anymore.

    20151107_151133.jpg
     
    • Like Like x 1
  2. crispey

    crispey crispey creme de la creme

    Nov 6, 2014
    7,280
    1,000
    Uk
    #2 crispey, Nov 26, 2015
    Always do, worked for me when the side panel screw fell out stopped the thing flapping about and possibly falling off, plus electrical tape.
     
    • Like Like x 1
  3. Tigcraft

    Tigcraft Unheard of Member

    Mar 29, 2014
    2,641
    800
    Holmfirth West Yorkshire
    #3 Tigcraft, Nov 26, 2015
    It'll weld up nicely will that. I swear by cable ties which just reinforces my believes
     
    • Like Like x 2
  4. cafecruzin

    cafecruzin Member

    Sep 1, 2014
    28
    18
    Perth Western Australia
    #4 cafecruzin, Nov 27, 2015
    any competent welder could fix that better than new
     
    • Like Like x 1
  5. Havit

    Havit Admin
    Staff Member Subscriber

    Jul 17, 2015
    9,697
    1,000
    Kent
    #5 Havit, Nov 27, 2015
    Bloody hell steve, you dont expect that to happen. I have cable ties in my kit. What do you carry in your box? Is their a weight limit on boxes.
     
  6. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,242
    1,000
    North Yorkshire
    #6 steve lovatt, Nov 27, 2015
    There is a 3kg limit on the box (a Givi) Wayne. Only ever had light stuff in it and have never loaded it up with gear - only the helmet and gloves etc.
     
  7. Havit

    Havit Admin
    Staff Member Subscriber

    Jul 17, 2015
    9,697
    1,000
    Kent
    #7 Havit, Nov 27, 2015
    That makes it even stranger that its broken like that and not even an after sale part. Are you going to weld or look for another one Steve?
     
  8. Havit

    Havit Admin
    Staff Member Subscriber

    Jul 17, 2015
    9,697
    1,000
    Kent
    #8 Havit, Nov 27, 2015
  9. thebiglad

    thebiglad Old fart, still riding !

    Sep 25, 2013
    5,072
    1,000
    Central France
    #9 thebiglad, Nov 27, 2015
  10. Rebel Ian

    Rebel Ian Member

    Nov 14, 2015
    20
    8
    Slough
    #10 Rebel Ian, Nov 27, 2015
    If it's not moving and should......WD40, if it's moving and shouldn't........cable ties or duct tape!
     
  11. Havit

    Havit Admin
    Staff Member Subscriber

    Jul 17, 2015
    9,697
    1,000
    Kent
    #11 Havit, Nov 27, 2015
    Bugger!!!
     
  12. Havit

    Havit Admin
    Staff Member Subscriber

    Jul 17, 2015
    9,697
    1,000
    Kent
    #12 Havit, Nov 27, 2015
    If your looking for a replacment i will look when i am at the NEC for you, Let me know Steve. They do seem to be hard to get.
     
    • Like Like x 1
  13. Tigcraft

    Tigcraft Unheard of Member

    Mar 29, 2014
    2,641
    800
    Holmfirth West Yorkshire
    #13 Tigcraft, Nov 27, 2015
    Shame your not near me as I'd weld that for free!
     
    • Like Like x 2
  14. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,242
    1,000
    North Yorkshire
    #14 steve lovatt, Dec 3, 2015
    Thanks Wayne - I only just spotted this - very kind of you to offer.
     
  15. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,242
    1,000
    North Yorkshire
    #15 steve lovatt, Dec 3, 2015
    Cheers mate - very kind of you to offer.
     
  16. Richard H

    Richard H Noble Member

    Oct 26, 2012
    1,134
    300
    Swadlincote Derbyshire England
    #16 Richard H, Dec 3, 2015
    Bet if you found a short section of solid steel bar that fitted tightly inside the tube, then bring the two broken bits together and weld it would be stronger than original.
     
    • Like Like x 3
  17. Thruccyboy

    Thruccyboy Senior Member

    Nov 18, 2015
    458
    113
    Essex
    #17 Thruccyboy, Dec 3, 2015
    Likewise....I always carry cable ties when I`m off any distance. I always carry some tape called "Rescue tape"....you can get it on the internet for about £6-8, it is amazing stuff, only sticking to itself once the cellophane rapper is pulled of it....great stuff. waterproof, self fusing & it insulates to 8000 volts too. In fact I have showed so many people how good it is that I reckon when I come to use it there will be bugger all left!!!!
    With regards to weight limit on a Givi rack, I have often exceded the weight limit by quite a bit & never had any problems, I`m not recommending that anyone does this on here, you takes your chance in life, but I have done it many, many times. Just lucky I guess. But then again I do have fitted to my tiger 800 roadie a SW Motech rack which is I feel a better quality rack over the Givi IMO
     
    • Like Like x 1
Loading...
Similar Threads - need carry cable
  1. Tim - Sprint ST 1050

    Need Help Identifying Loose Tubes

    Tim - Sprint ST 1050, Sep 25, 2025, in forum: Technical Help
    Replies:
    83
    Views:
    3,716
    TRIPLE X
    Nov 17, 2025
  2. Dave Murphy

    2013 Tiger 800 Denali Horn Fitting , Help Needed

    Dave Murphy, Sep 16, 2025, in forum: Technical Help
    Replies:
    2
    Views:
    321
    davidsolano
    Oct 11, 2025
  3. Prassi

    Help Needed To Install Heated Grips On Tiger 900 Gt

    Prassi, Sep 13, 2025, in forum: Technical Help
    Replies:
    7
    Views:
    680
    David£25
    Sep 25, 2025
  4. joe mc donald

    Barend Mirror Needed.

    joe mc donald, Aug 15, 2025, in forum: Wanted
    Replies:
    2
    Views:
    510
    joe mc donald
    Aug 22, 2025
  5. Sgroove

    Need Help With A Coc For A Thruxton From Canada

    Sgroove, Jun 6, 2025, in forum: Triumph General Discussion
    Replies:
    1
    Views:
    665
    joe mc donald
    Jun 14, 2025

Share This Page

Sign up