Tiger 800 Turn Signals Fogging

Discussion in 'Tiger / Explorer' started by Anakin, Jun 24, 2018.

Tags:
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. Anakin

    Anakin New Member

    Jun 23, 2018
    6
    3
    Chelyabinsk, Russia
    I bought used XRx. 2015 m.y. It usually stay under the sky without any roof.
    After the first rain, I saw water drops into the all turn signals. Unexpectable, actually :(
    I need your advice about this problem. Maybe there are some nice LED solution from reliable manufacturer?
     
  2. crispey

    crispey crispey creme de la creme

    Nov 6, 2014
    7,194
    1,000
    Uk
    Mine have never done that, maybe check the edges and re seat them. Try a little silicone around the screw holes
     
    • Like Like x 1
  3. Anakin

    Anakin New Member

    Jun 23, 2018
    6
    3
    Chelyabinsk, Russia
    One of them, right rear, I will change anyway. Previous owner used the Zard exhaust and slightly melt it :)
    But other three looks all right. This is strange...
     
  4. Retired Phil

    Retired Phil Well-Known Member

    Jun 22, 2017
    211
    93
    San Rafael
    If you can get the lens off the blinkers, dry the inside off, check the bulb and socket for moisture and corrosion and clean that off. Put the lens back on and seal it with some silicone. The first question is How is moisture getting in there in the first place?
     
    • Useful Useful x 1
  5. Anakin

    Anakin New Member

    Jun 23, 2018
    6
    3
    Chelyabinsk, Russia
  6. Anakin

    Anakin New Member

    Jun 23, 2018
    6
    3
    Chelyabinsk, Russia
    • Like Like x 1
Loading...

Share This Page