Hi as a newbie I have tried to find a link to this question but cant find one, my first time with a trophy ABS bleed, I had a caliper pot pop out on me when servicing the front breaks so need to fill and bleed the abs, I have stripped the shell and have done an abs on a GS so know a bit... my question is to anyone can it be done in my garage (DIY) without dealership pc being connected etc.. and will I have to fully remove the tank and battery... thanks in advanced for any replies... Gazza
Hi Gareth and welcome to the forum reading up when I replaced the rear caliper it said dealer or power commander software to open ABS. I bled using bleedbuddy bottle and strapped the pedal down overnight. Have not required topup and good pressure (even after having practiced emergency stop at rider training) https://www.thetriumphforum.com/gallery/albums/new-4-pot-rear-brembos.600/?page=1