Clever people, would you know the size of the bullet connectors on my Street Twin, I'm changing the indicators and the various bullet connectors in my Halford kit are different sizes, none the same as stock. I could change both ends but will revert to stock if and when I sell Edna so would rather stay as per factory, only need a dozen male and female
Japanese bullet are 3.9mm. Not sure if thats what you want. You can check these at vehicle wiring products, kojacat or ebay under 3.9mm non insulated connectors. Better if you have the proper crimp tool, not the ones for pre insulated crimps. If i see a bike with those crimps i cringe. The right tool is not expensive. A pic of the connector you need would be really good.
When I had to disconnect mine on the 2010 Speed Triple, I noticed they are a push in and twist connection, not your standard push in only There are two tabs at the end of the connector, this could be why the Halfords connectors aren't working
Or are they like this https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/303141622891
