Hi Folks. I have a 2019 Street Cup and want to fit a Denali 2 power hub. My problem is which wire do I need to connect the unit to for a switched live. I know the red and black wires go straight to battery and earth - the yellow wire is for the ignition live. Hopefully someone can point me in the right direction. Going to be fitting a dash cam on bike - also have a few other goodies to put on. Have changed both rear suspension for Fox and silencers for V&H ones. Will put some pics up when all sorted. Thanks for reading
Cpl-Clott I had my tom-tom fitted to the ignition by my local dealer. The bike should have a USB Point under the seat which i use to charge my iPhone Joe
I have the charger port under the seat, but am fitting a Thinkware dual cam system to the bike. I'm wanting to use the power hub in case I install anything else on bike and am able to keep the wiring to a minimum. Also not sure if the usb hub is capable of powering the Thinkware module box.