Sprint Gt 1050 Lowering Pegs

Definitely loads out there.

 

I have these on my Speed Triple. I bought them for my VFR 800 as they are the same as the blackbird but they fit the triumph and make the leg position more relaxed

http://www.jaws-motorcycles.co.uk/bird2.htm#lowers
I also use some general Honda pegs with rubber pads on in conjunction with the lowering kit.

 

Hi,
Could you please post me a pic of the foot pegs?

I've got a 2002 Speed Triple and I'm looking for something that does the job, unlike the things i bought from China (I know...) which made riding almost impossible!

Thanks.

 

The footrests are Honda, CBR600 I think though almost anything for a VFR,VTR, CBR 1000 etc will do.

 

Looks good! I take it then you don't need to hold your feet at a weird angle, each time you want to brake or change gear?

I bought these and they are terrible. Fairly well made, but terrible!

 

No, not at all. They do stick out a bit more than the original pegs and I had to adjust the brake and gear lever to suit but it didn't take too long to get used to it, it certainly gives a more relaxed riding position and the rubber tops to the pegs add that bit of extra comfort.

 

They would with a bit of work. Where the Honda peg is bolted to the lowering bracket the inside dimension is 9mm, on the standard peg it’s 7mm so you’d have to file/grind 2mm off and that could weaken it. It is doable tho.

 

They look fine.