speedmaster

Discussion in 'Newbies Hangout' started by speedmaster, Mar 20, 2013.

  1. speedmaster

    speedmaster New Member

    Mar 17, 2013
    5
    1
    South Derbyshire
    Hi i am new to this site my name is ian,enjoying reading articles on here.Thought i would a post a question myself.I hav a 2012 speedmaster and i have a very intermittent problem that when i go down hills my bike has cut out acting as though short of fuel just wondered if anyone else had problem.Its been back to triumph cant find a problem. Thanks
     
  2. workshyfop

    workshyfop Member

    Feb 26, 2013
    297
    16
    Hi Ian, I've had problems with my 2011 America cutting out in the past, seems they're very sensitive to engine idle speed, if this is set, even a couple of hundred rpm low, the bike will cut out. Pidcocks have had to adjust mine a couple of times, once when new, & after I had the TORs fitted. You can increase it yourself using the idle screw, see if it makes any difference, but obviously it'll need plugging into the dealers laptop to get it spot on.

    Best of luck mate. Tony.
     
    • Like Like x 1
  3. P19DJG

    P19DJG Banned

    Mar 16, 2013
    1,660
    0
    Hi & welcome aboard. Ive had to increase my tickover slightly since fitting long TORS on my 07 America.
     
    • Like Like x 1
  4. Conquest Racing Ltd

    Conquest Racing Ltd Contact us for your Triumph Forum discount
    Trader

    Feb 2, 2013
    449
    313
    Dorset
    Hi welcome to the forum, sorry to hear your first post on here is regarding problems with your new bike. I'm no good when it comes to technical machinery I can't even use Lego properly :mad:

    I hope you get it sorted :upyeah:
     
    • Like Like x 1
  5. Richard H

    Richard H Noble Member

    Oct 26, 2012
    1,134
    300
    Swadlincote Derbyshire England
    Hi welcome to the forum, the nice thing about joining a newish forum is you get to pick the the best forum names (like I err didn't!). Not much help on the cut out front sorry.
     
    • Like Like x 1
  6. JimDiesel

    JimDiesel Member

    Feb 27, 2013
    450
    16
    Nottingham
    Hi Ian and welcome to the forum mate,
    I can't help I'm afraid but I'm sure plenty will from here.
    Enjoy the forum bud
     
    • Like Like x 1

Share This Page