Speed 4 engine managment light after generator change

Discussion in 'Technical Help' started by slimfastshady, Apr 12, 2013.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. slimfastshady

    slimfastshady New Member

    Apr 12, 2013
    12
    3
    Can anyone reccomend a fault code reader for a 2002 speed four i dont want to remap just need the code.I have tried the usual 3 heating cycles to clear it and it has not worked. Bike runs fines so thinking it just needs resetting

    cheers
     
  2. Screwball

    Screwball Active Member

    Mar 21, 2013
    1,016
    36
    Kent
    Download Tune ECU. its free, all you need is the cable and the site will tell you where to buy it..

    TuneECU_Start

    I use it and it very good
     
  3. slimfastshady

    slimfastshady New Member

    Apr 12, 2013
    12
    3
    Hi I had look is tune ecu easy to use I don't want to remap the engine I can just find the faults?
     
  4. Screwball

    Screwball Active Member

    Mar 21, 2013
    1,016
    36
    Kent
    Yes it shows fault codes and you can also reset the error. I've not had need to do it myself but it is a function.
    The remapping is just another benefit.....:upyeah:

    Jut read the instructions it is easy to use. You just need a laptop...
     
  5. Screwball

    Screwball Active Member

    Mar 21, 2013
    1,016
    36
    Kent
    eBay item 230583176225

    Tune ECU cable.. £9.95
     
  6. slimfastshady

    slimfastshady New Member

    Apr 12, 2013
    12
    3
    Ok that is great I will order one today?
     
  7. Screwball

    Screwball Active Member

    Mar 21, 2013
    1,016
    36
    Kent
    Tell you what as long as you return it I'll send you my cable so you can try it out.
    Then if it works you can buy your own and send mine back....
    Save you some money and you can confirm its ok...

    Send me a PM of you want...
     
  8. slimfastshady

    slimfastshady New Member

    Apr 12, 2013
    12
    3
    That's kind of you to offer! I have ordered one already think I will be getting use out off it as had a few problems with the bike already!
     
  9. slimfastshady

    slimfastshady New Member

    Apr 12, 2013
    12
    3
    just a quick update, i went out for a ride and could smell an eggy smell turns out the regulator/rectifier is broke and was overheating the battery, i used the tuneecu and it came back system voltage high and coil 1 short to battery or over temp,ignition coil 1 curcuit malfuction i have researched this hopefully once the new reg/rec is on should sort this
    thanks for your help
     
    • Like Like x 3
  10. jonny

    jonny Active Member

    Mar 26, 2013
    142
    43
    sunny cheshire
    hope you get it sorted
     
  11. Screwball

    Screwball Active Member

    Mar 21, 2013
    1,016
    36
    Kent
    Cool. Glad it worked out for you.. :upyeah:
     
  12. slimfastshady

    slimfastshady New Member

    Apr 12, 2013
    12
    3
    New rectifier/regulator no engine management light gonna take her for a blast today!
     
    • Like Like x 1
  13. slimfastshady

    slimfastshady New Member

    Apr 12, 2013
    12
    3
    Spoke to soon recon stator burnt out again not having much luck
     
  14. Screwball

    Screwball Active Member

    Mar 21, 2013
    1,016
    36
    Kent
Loading...

Share This Page