Thank you for any help in advance. I have checked some videos online and got answers to some questions. It looks not very complicated. I get a Triumph bypass plug. I will unplug the alarm and plug the bypass on the switch. But I found there is an electronic part under my rear seat which as shown in the photo below. It connects to the alarm directly. I am not sure if It's a movement/nudge sensor that is a part of the alarm. Can I just remove it with the alarm?
It's just a magnetic seat removal sensor, just take it off with the alarm. There should be a corresponding bit on the seat to take off.
yep. cheers. will go-ahead to remove heat grips and order lots of parts from ebay......hahahaha........