Lust Lowering Links

hi there. Nope. not without mods...
Well, the links will but the stand will not.
I know this as I did it yesterday.
The rs stand does not have a threaded bolt through it where as the previous version 16-17 does.
You need a 12mm drill bit to take out the thread on the older stand to fit the rs.
Or, you need to get the stand pin as part of the sale for the old stand!

 

I had 40mm lust ones with the original stand and it was too veritical with the stand.
Didn't look like it'd take much to knock it over.
I fitted 25mm ones yesterday, and it was fine.
I just fitted the stand because I had it.

 

I’ve still got the 40mm ones but I really wouldn’t recommend them without a lowered stand. I’d definitely recommend the 25mm ones though.
I dropped the front 1cm as I’ve got evotech rad and oil guards on plus a fenda extender. I think wheel would hit the rad if I went any more.

 

No worries. Makes a nice difference
You will already know this i'm sure but you will need an abba stand (or equivalent) for this job too.

 

Put them on eBay matey. I paid £65 no problems. Well worth it.

 

Perfect. Looks good and like you say, I couldn't feel any difference either!