Jerky Tiger 1050

Discussion in 'Technical Help' started by Maxb10, Jul 13, 2025.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. Maxb10

    Maxb10 Member

    Jun 6, 2020
    51
    18
    Lincoln
    Hi recently bought tiger 1050 2007 3k on clock very jerky at low speed and low revs otherwise brill!
    Any ideas how to cure?
     
    • Useful Useful x 1
  2. TRIPLE X

    TRIPLE X Senior Member

    Sep 1, 2021
    680
    243
    Norfolk
    Is the bike standard? Does it have the original exhaust? It might be worth checking that the throttle bodies are balanced.
     
    • Agree Agree x 1
  3. joe mc donald

    Subscriber

    Dec 26, 2014
    15,823
    1,000
    slough / burnham
    Yes and i would check the fuel.
     
  4. Iceman

    Iceman Crème de la Crème

    Apr 19, 2020
    2,955
    1,000
    Lancashire
    #4 Iceman, Jul 16, 2025
    Last edited: Jul 16, 2025
    The best solution if you just want smooth running is to get a Rapid Bike Evo module, easy to fit and sorts the horrible Euro Emissions restrictions out, however if you want to improve low and mid range, and increase BHP then go the re map route. I fitted a Rapid Bike Evo and it sorted the low throttle issues out perfectly, however I wanted better low and mid range performance, and had it re mapped using the Woolwich Racing Map, and the difference is amazing, it took the best part of a day on the rolling road to set it up. Also a lot depends if you have a replacement end can on, have de catted the exhaust etc.
     
    • Like Like x 1
    • Useful Useful x 1
  5. Maxb10

    Maxb10 Member

    Jun 6, 2020
    51
    18
    Lincoln
    Thanks for advice will check all mentioned.
     
    • Useful Useful x 1
Loading...

Share This Page