Flyscreen visor removal ?

Discussion in 'Speed Triple' started by PeteH, Jul 15, 2014.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. PeteH

    PeteH Active Member

    Oct 1, 2013
    57
    28
    Chester
    Need to take off the additional visor thingy off for cleaning, are the three screws fitted into captive grommet type nuts on the flyscreen ?
     
  2. SteveJ

    SteveJ Super Moderator

    Aug 12, 2013
    524
    113
    North Hampshire
    From memory it is just a matte of undoing the screws and there is no drama putting them back on again

    Cheers

    Steve
     
    • Like Like x 1
  3. PeteH

    PeteH Active Member

    Oct 1, 2013
    57
    28
    Chester
    Ok, Thanks for that, didnt fancy taking the flyscreen off too to fish out any wayward nuts
     
  4. Richard H

    Richard H Noble Member

    Oct 26, 2012
    1,132
    300
    Swadlincote Derbyshire England
    Simple job, just undo the screws. The rubber mounted nuts are a push fit into holes drilled in the visor, just don't push to hard or you can push them through.
     
  5. PeteH

    PeteH Active Member

    Oct 1, 2013
    57
    28
    Chester
    I found that out with battery cover when fitting your ex tank mount, all sorted now thanks guys:upyeah:
     
Loading...

Share This Page