Fitted the arrows!! 1. Remove seat and remove rear plastics. 2. Loosen mid pipe clamps 3. Unbolt and remove exhaust. And repeat for the other side This is what we're left with Tea break! 4. Fit new mid pipes and springs. (Do not tighten bolts yet) 5. Fit new exhaust hanger brackets 6. Fit one side exhaust Leave fitments slightly loose. 7. Do the same for the other side. 8. Make sure the exhausts line up and your happy with them! This is where the leaving everything loose comes into play. Once your happy start tightening from the mid pipe up. Im not 100% on how they line up but they work and I can adjust them at a later date. Gave her a 10 minute tune up And then she threw a strop because its snowing.
Nice set of photos, thanks for posting. Have you manged to re-map the fueling at home? Keep looking at the arrows cans for my bike just not sure I can justify the cost; especially what dealers want to fit and set up
Great step by step guide bud.... Rich save a search on eBay for street triple arrow cans.. Seen a few pairs go through, so long as not damaged mug ores metal polish will bring even the dirtiest cans back to new.... I have the arrows on my speed and love them!! Another good thing with the arrows is that it's only a two minute job to put baffles in or out!!! Fit them yourself n just download the mapping software.... :upyeah: