Dtc Code

Discussion in 'Bonneville' started by 243jimb, Jan 10, 2026 at 8:55 PM.

  1. 243jimb

    243jimb Member

    Nov 27, 2018
    13
    8
    Canada
    After a cylinder head removal and replacement on my '24 T120 it does not want to start and I am getting a code P28-01. After searching this it comes up with Oxygen sensor (not disturbed) or transmission code, I don't know which it would be. I don't have Tune ECU.
     
    • Useful Useful x 1
  2. Robbi18

    Robbi18 Member

    Jun 15, 2025
    25
    18
    United States
    Check all the connections you unplugged, especially the small ones for the cam sensor or crank sensor. That code is often a cam/crank sync issue. Did you time the cams exactly right? Double-check the timing marks. A sensor left unplugged or mis-timed cams will cause a no-start with that code.
     
    • Agree Agree x 2
  3. 243jimb

    243jimb Member

    Nov 27, 2018
    13
    8
    Canada
    Thanks, I have discovered that it is related to the fuel injector on Cylinder 1.
     
    • Useful Useful x 1
  4. Eldon

    Eldon Crème de la Crème

    Nov 14, 2018
    9,090
    1,000
    North Yorkshire
    Please expand, damaged jackplug, cut wire, other etc ????
     
    • Agree Agree x 1
  5. 243jimb

    243jimb Member

    Nov 27, 2018
    13
    8
    Canada
    No damage, I'm investigating.
     
    • Like Like x 1
    • Agree Agree x 1
Loading...

Share This Page