HELP-probs dozens of these threads but im stuck, 2013 Bonnie SE. Want 2swap out old indicators for black new on a budget& is it easy 2 do?
Am sure you'll get an answer here mate but it's probably best in the Bonneville section as they will have the specific knowledge
Have a look at Lextek https://www.lextekproducts.com/electrical/indicators or CMPO https://www.chinesemotorcyclepartsonline.co.uk/search?category=31213 They both have loads of cheap aftermarket indicators.
Welcome to the forum. You're right, there are loads of options for aftermarket parts for the Bonneville. My advice would be not to rush any decisions, and have a good look around on forums etc first to get some ideas of the look/style you want to achieve. A couple of good sites for parts that I have used are: Squaredeals: https://www.squaredeals-ltd.co.uk/bonneville-thruxton-t100--scrambler-800865cc-parts-281-c.asp Motone: https://www.motone.co.uk/motorcycle-parts-c26/triumph-bonneville-c25 If you are working on your bike yourself, then I'd also recommend a Haynes workshop manual. A search of YouTube will also give you loads of demonstration videos from various sources for fitting most common accessories. A good starting point might be Delboy's Grarage channel for example the video below shows fitting a tail tidy to a Bonneville: I have the smaller chrome version of these indicators https://www.squaredeals-ltd.co.uk/t...urn-signals-matte-blackclear-lens-32031-p.asp fitted to my Bonneville, I'm very happy with them and they were easy to fit (with the additional connectors https://www.squaredeals-ltd.co.uk/t...rness-interconnects-front-or-rear-28104-p.asp). You should be aware that if you fit front indicators with short stems, then you may need to either relocate the indicators or the ignition switch, otherwise there may not be sufficient gap for the ignition key.