I have Boneville t100 (2013). My mistake of not using it for a bit, but had the battery connected and charged. I turn the key and the front light turns on bright. Keep turning the key to "switch" mode where you start the motorcycle, but nothing happens, the panel does not turn on, I cannot even try "turning it on". No sounds made no clicks. What could that be? thanks
check fuses and actual battery voltage. If it's the original, its knackered. Voltage may seem ok, but it's probably not.
9 times out of 10 it’s the battery But check fuses and connections especially the battery leads at both ends
Check the battery voltage when under load, You can get 12v+ from a "fully charged" knackered battery but it drops several volts under load.
Yes, thanks. That is why I actually removed the battery to have it on a bettery tender. It seemed to be fine. The battery turns on the full light, but does not go further than that. Maybe I need a new battery. Thanks
I have not checked it when the light is on yet. That will be my next step. Thanks so much. I am pretty new to this so I need to find ways to fix this. Thanks.