After reading all the Gearbox & Quickshifter threads I cant find an answer to what's going on with my 1050RS Riding along in 6th gear, with Cruise control on, it will suddenly flash to 5th gear on the display & shut off the Cruise (because it thinks I've changed down). Then display will go back to 6 after a little while. The quickshifter works perfect shifting down but not always up, esp. 4-5 & 5-6. Sometimes it is perfect, other times it will not shift gear till I pull the clutch or roll the throttle So I think it is a Gear Position sensor issue & quickshifter problem as well, but not sure what I can do about it Any ideas? went in for a Demo on a KTM 1290 SD GT....but the trade in for the Speedy is just too painful, offered $8K !
It's more likely the speed sensors on the wheels not talking to each other. Make sure they are fitted properly and check the wiring.
I don't know with your bike whether you have the ability to go into the menu on the display but the quick shifter can be turned off I know this as my brother has had to have a new one luckily under warranty on his Tiger 1200 being nearly three years old with close on 10k I think if I remember it is listed as TCS on the menu if you can do this you can try this and at least rule it out or not if the issue continues I think the quick shifter is about £130 but it probably won't be just plug and play mr.triumph wants you to introduce it to the bike for a few extra of your English pounds or us dollars
