2025 Trident 660 Setting Riding Mode.

Discussion in 'Technical Help' started by zvezdah1, Dec 24, 2025.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. zvezdah1

    zvezdah1 New Member

    Nov 16, 2025
    14
    3
    georgia
    I searched here and online, watched a number of vids and read the part in the manual about it. I navigate to main menu hit "confirm" and it takes me to the menu displaying riding mode, click right arrow, scroll down and select "rain" and "confirm" it prompts me to set dtc, abs etc. I pass thru all those and confirm then exit the menu, and turn the bike off. Note: this is with bike On, but not running. When I go back to the menu it shows up as "rain" again.

    ALso, I can't seem to find where on the tft display where it tells you what ride mode is selected.

    Any help appreciated.
     
    • Useful Useful x 1
  2. zvezdah1

    zvezdah1 New Member

    Nov 16, 2025
    14
    3
    georgia
    I think I figured it out, I did not press the "M" button below on the left control. But do I take it, that current ride mode does not display on the tft screen unless you press the "M" button?
     
    • Agree Agree x 2
  3. joe mc donald

    Subscriber

    Dec 26, 2014
    15,885
    1,000
    slough / burnham
    My 660 needs to the button pressed to accept the mode.
     
    • Like Like x 1
    • Agree Agree x 1
  4. GA-Dawg

    GA-Dawg New Member

    Aug 11, 2025
    20
    3
    Alpharetta, GA USA
    Click the "M" button to see what mode you're in while riding. Click again to cycle through the choices and switch between riding modes. Can do so on-the-fly.

    If I'm not mistaken, the section within the Main Menu you mentioned initially is just for adjusting the electronics within each individual mode, sensitivity or whatnot.
     
    • Like Like x 1
    • Agree Agree x 1
Loading...

Share This Page