2019 T120 Console Problems

Discussion in 'Technical Help' started by JMLamarre, May 24, 2020.

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. JMLamarre

    JMLamarre New Member

    May 24, 2020
    10
    3
    GTA Ontario
    So... recently purchased a brand new 0km T120 Black... it's such an incredible ride!
    However during the first long ride I've experienced some concerning issues...
    1.Either at stop or in motion I can't scroll through the info menu, and turning on the grips warmers is sketchy at best.
    2. Either at Stop or in slow motion - the instrument console will do a "reset" (all lights come on, needles cycle up to max and down to min - and then everything blanks and comes back on to normal).

    Could this be from the recall due to clutch cable or is it something else?

    Any help would be greatly appreciated!
     
  2. dilligaf

    dilligaf Guest

    I don’t know about your bike mate :confused:
    But have a good read of the owner manual with the bike in front of you :)
    If you’re still not happy take it straight back to the dealer :confused:
     
    • Agree Agree x 1
  3. JMLamarre

    JMLamarre New Member

    May 24, 2020
    10
    3
    GTA Ontario
    Yeah, I've been through that... Dealer gets a call tomorrow morning.
    Thought perhaps if others had experienced...
     
    • Like Like x 1
  4. TimmyTheHog

    TimmyTheHog Member

    Feb 20, 2020
    24
    8
    Surrey BC Canada
    my buddy's StreetTriple had the similar issue and turned out to be loose battery terminals.

    every time he shift the bike, the terminal will come off just enough for his bike to reset.

    but yes, still check with the dealer.
     
    • Like Like x 1
    • Useful Useful x 1
    • Agree Agree x 1
  5. JMLamarre

    JMLamarre New Member

    May 24, 2020
    10
    3
    GTA Ontario
    So... For anyone that may have been following...
    The issue was that when the dealership had installed a charging socket they didnt seat the connection to the console properly when it was all put back together. This cause a console reset every time the bars were turned in a particular direction...
    Reseating the connector solved the problem!
     
    • Like Like x 5
Loading...

Share This Page