04 Daytona 600 Help.

Discussion in 'Technical Help' started by mcfischer51, Jan 10, 2024.

  1. mcfischer51

    mcfischer51 New Member

    Aug 14, 2023
    0
    1
    USA
    #1 mcfischer51, Jan 10, 2024
    Hi I've been fighting an issue on my Daytona 600 where nothing happens when I press the start button. I've replaced the harness, the ECU, the switch, the starter relay and solenoid, I've ruled everything out except the little block in the back of the bike. I'm not sure what I'd does but looking at wiring diagram it's runs to just about everything in the bike. Any information would be appreciated.

    PXL_20240101_023848002.jpg
     
  2. Bikerman

    Bikerman Life's not a dress rehearsal.
    Subscriber

    Oct 29, 2014
    2,405
    1,000
    Lincolnshire
    #2 Bikerman, Jan 13, 2024
    Looks very much like a blanking plug. This is used if the alarm, that might have been on it, has been removed.
    It basically makes the complete circuit again.
    eee.jpg
     
  3. Iceman

    Iceman Crème de la Crème

    Apr 19, 2020
    2,582
    1,000
    Lancashire
    #3 Iceman, Jan 13, 2024
    Bikerman is correct, it is used when disconnecting/removing the alarm system that has been plugged into the main wiring harness as opposed to splicing into the loom. The wiring in your photo looks to be in very poor condition, I would cut back all the damaged wires and re connect them, leave it like that and you will risk overheating/shorting and a potential fire risk, not to mention poor/non starting.
     
  4. Bikerman

    Bikerman Life's not a dress rehearsal.
    Subscriber

    Oct 29, 2014
    2,405
    1,000
    Lincolnshire
    #4 Bikerman, Jan 13, 2024
    Never noticed the wiring till I looked at it on the laptop. Not in good nick at all.
     
    • Agree Agree x 1
Loading...
Similar Threads - Daytona 600 Help
  1. Lawrie Nichol

    Wiring Diagram And Software Help Needed :(2004 Daytona 600

    Lawrie Nichol, Jun 26, 2022, in forum: Technical Help
    Replies:
    2
    Views:
    1,824
    Lawrie Nichol
    Jun 26, 2022
  2. Craig Dickson

    Help Needed To Find My Old Daytona 600

    Craig Dickson, Nov 8, 2018, in forum: Daytona
    Replies:
    14
    Views:
    1,841
    Adie P
    Dec 26, 2021
  3. Andy Morgan

    Help Needed Daytona 600

    Andy Morgan, Apr 4, 2018, in forum: Triumph General Discussion
    Replies:
    14
    Views:
    2,048
    Andy Morgan
    Apr 10, 2018
  4. Daytona6002004

    Daytona 600 2004 fairings help me please !!!

    Daytona6002004, Feb 2, 2015, in forum: Daytona
    Replies:
    0
    Views:
    1,231
    Daytona6002004
    Feb 2, 2015
  5. priceydog

    daytona 600 no power after 8000 revs ..... help

    priceydog, Jul 13, 2014, in forum: Triumph General Discussion
    Replies:
    2
    Views:
    690
    SteveJ
    Jul 14, 2014

Share This Page

Sign up