Separate names with a comma.
Hello all. At the finish line just fitting new coils and a Pazon system. I need to know what these white wires do as they were wired into the Iris...
:laughing: So no need for the TDC tool or timing wheel I just bought then :p
Can confirm that two years on, tank is still spotless with intermittent use and bike sitting inside over the winters (with fuel in it).
Hi all. Small update (and more questions lol). Decided to do a full ignition system overhaul so went with a Pazon system and two new 6V Lucas...
Hi all. Been slowly getting a ‘63 TR6 back to perfect health but am on the home stretch and can’t get it to start - have fuel, new (dry) plugs,...
Yeh got those clean and ready lol!
Ace. I’ll order that up. I’ll need: 1 x Speedo drive 1 x long cable 1 x large axle washer (retain speedo drive) And finally (sorry) on the left...
Thanks! Yeh this bike is a bit of a mutt - the V5 says it’s a ‘63. I think you pointed out before it has a ‘68 front end in the past. Should I...
Ok! I have no speedo drive at the rear hub / axle - does that change things? The cable from the speedometer disappears inside the gearbox from...
Stepped spacer sits inside the frame or inside the drum brake? I do have the large washer but I think I’m missing the Speedo drive altogether!
Think the mount strap was bent out of shape, nipped it up and it’s sorted. Wonder if you guys could help with a couple more quick noob fixes. 1....
Thanks pal. It’s helped a bit but it’s still sitting too far from the fender. The rear of the fender is the issue it hits the rear frame loop and...
Hello all. Need to call on your knowledge again. Having a bit of aggro getting the rear fender to sit correctly, after removing it to release...
Hi all. Rather than the pain of trawling the parts catalogue for various individual crush washers, would something like this cover me for a full...
State of play as of tonight. [ATTACH] [ATTACH] What started as a little trouble shooting has resulted in new Amal carb fitted, new battery box...
Meant how to get it off lol
Any steers on the fender…
Now trying to get the rear fender off. Removed all the bolts but it’s not budging. All the bolts are rotten. Can’t bear those back on so back to...
Jesus it can’t be as hard as I made it to get the wheel off? The fear fender / reg plate makes it almost impossible. I had to lift / tilt the bike...
Chain off! Brake torque and actuator arm off. Axle nuts off. But chainguard is stopping the wheel coming out. Is the axle supposed to come out to...