Separate names with a comma.
Hi, I have 2011-2015 arrows on my speed triple, so they will fit. The 2016-2017 arrows will have a non removable baffle.
One of the easiest set ups I had on a previous bike, was an old top box bolted to a second hand pillion set. Just clip in and your away.
Personally I use dealer tool. I chose this over TuneEcu, because I wanted something that was hard wired to my lap top. Not a wireless app, not...
This video might help :) [MEDIA]
I've got a little YouTube channel, nowhere near the size of his. My channel has only resently become 'monetised', but going on his numbers. I...
I believe you have to be cautious greasing bolts, unless the manufacturer specifies it. As it can affect the torque pressures, I guess it's ok on...
recently I removed the eccentric chain adjuster on my speed triple, and found it had been grease with copper grease from the factory. So I cleaned...
This is the reason I don't like modern bikes. It reminds me of a car I use to have, the rear wiper would come on randomly. Like yourself, I...
Thanks for all the positive comments, it's nice to know the channel is helpful. Superhans I'll probably get around to the valve clearance at some...
Just browsing my YouTube analytics, and discovered almost 2% of my views come from this forum. So a BIG thanks, and keep it up to help the channel...
Personally I would have another go at the carb's, I did mine (ZX10) and it ran ok . But poor running soon returned, as I hadn't cleaned the pilot...
Take it apart and clean it, I've looked at the parts diagram. It looks very similar to the Keihin carb's on my Kawasaki. If it's struggling to...
I'm using dealer tool, and think it works great. Here are some videos https://www.youtube.com/playlist?list=PLHUYld1ILQc-s8HXzkP-M7bOs4fZkAOOu...
I believe they will fit, I'm pretty certain they are the same ones I fitted to my 2016 speed triple R. The bike didn't change that much form the...
Yes you can, take a look at this video. [MEDIA]
There is a line on the fork, get it 5mm below the bottom of the top clamp. Here is a video on doing it, please sub to my channel for lots of Speed...
Looks nice, I did the same to mine. Luckily I had replaced the rear foot pegs, just before I dropped the bike. The pegs were the only thing that...
Clutch switch I'd say
It looks a bit home made to me. I don't know that much about it, but when people run there bikes with waterless coolant, they adapt there system....
I found these good https://www.gbmotorcycleproducts.com/