Separate names with a comma.
Yes definitely, especially as this was sat in a shed after the owner passed away... It's back from the brink.
Gents, all sorted. I am now confident that all of the gunk and crap gets stuck down the bottom of the rad and restricts it's overall capacity and...
Yes it's a late 955i, rad is clean fins all good and clear, I've got the rad off for a more thorough flush with a hose. Will be refitting today...
Hi guys, I've just returned my S3 to the road after a long lay off. Can anyone advise on what a normal running temperature is, it seems hot to me...
Hi, I've bought an original TOR high level can for my project bike. I'm not sure but I think the bolts supplied with the bracket are wrong. Also...
I ended up ordering all the perished hoses and reinstalled the system as it should be. Good old Fowlers for parts availability.
Great, thanks for your help. I got them on and routed as best I could. If anyone has a side panel off and confirm which one the valve goes on at...
Got the correct one at last, but then needed the brass bush / insert. All sorted. On to the next thing... :)
H, I have forgotten to reinstall my two tank breathers hoses on the left hand side, one has the one-way valve. If I am looking at the left side...
Thanks, been checking forums, FOwlers site and ebay all weekend. Seems there are 2 types, mine being a 2004 SHOULD have the thicker (at the pivot)...
Hi, rebuilding my project, I dont seem to have the brackets that hold the front seat down. Does anyone have any spares or can send me dims to...
Happy New Year all, Can anyone help, twice now I've ordered a clutch lever and it's been too fat at the pivot bolt to fit in the clutch perch. My...
Luckily for me, a mate is a welder / fabricator and very useful at these kind of issues, bad luck he is busy decorating at the moment, so I may...
Happy NEw Year all. I ended up buying twice on slide hammers. The first one was a lot smaller than expected and didn't really have what it took, I...
I bought the above torque wrench and was actually surprised at how much more effort than hand tight it was, I expercted it to have been pretty...
The other option for peace of mind is buy a 1/4" drive torque wrench, think I am going to......
5nm is not a lot, I have just chamnged my filter and they didn't take much to undo. I have re-tightned by using the 8/10mm (can't remembner)...
Thank you both for your replies, partly my stupidity but being as I am working in a cramped single garage - and the bike having the "left" as you...
Hello, during going through this bike which has been sat for a few years, I'm now at the rear hub, swingarm, linkage section. I've got the hub...
Thanks. Off season now with this early cold snap - hence lots of garage time and not riding..!