Separate names with a comma.
Thanks for this reply. I am thinking that there may be a problem in the boyer - so will need to isolate each piece now. I'll let you know - thanks...
Here is a link to a YouTube video of my bike running today - in case any members can diagnose from the video. Thanks! [MEDIA]
On another post I hade the valve issue brought up. I suppose it could be something like this. The whole thing started after a long ride some...
From another post I followed this advice today - so far: I did wire directly from the battery -ve terminal to the transistor box white wire. I...
There is plenty of power at the battery and the coils, but no spark. Perhaps there is a way to bypass the ignition switch to see if it is the switch?
OK, just now getting back to diagnose and fix this T100. So I went ahead and got new coils and plug and leads and installed them. Now, when trying...
I'm still moving forward on this project and wonder if any members know where I might get an exhaust system for this Rickman Mark 3, with a...
Any experience with Ceriani Forks out there? I have 35mm used Cerianis, but I can't seem to find a diagram for them to figure out how to take them...
OK darkman, thanks that is a big help.
Engine case numbering issue - so when I got this engine, T120R DU45678, I realized I had a 1967 engine. The primary cover was not on the machine...
Thanks Darkman! I think I'll be needing a thicker copper head gasket to fix the clearance on the skinned head. In another forum I was also...
Head and Cylinder Clearance Issue. So I thought after getting the rear wheel aligned I'd put the rest of the engine together. Got the pistons and...
Rear Wheel Alignment fixed! So, I was able to get my rear wheel alignment fixed. It seems the PO of this project built the wheels, however as this...
So I think I know the problem with the wheel not centering in the swingarm. I got in touch with the previous owner of the frame and wheels and...
So . . . trouble with my rear wheel alignment. On my Rickman build I'm using a BSA QD crinkle hub. I've had an axle made to fit the Rickman swing...
Some progress on my Rickman build. So I've got the bottom end finished and installed the engine in the frame. Waiting to put on the top end just...
OK, so I have a 67 Bonneville with 12 volt battery and hooked this battery to my T100C. The same issue persists so the battery must be ok.
Wow, OK. So the old battery tested OK for voltage, but still it was a new battery that fixed it? I will give this a try - because of this is the...
ALSO - I tried switching coils. I ran the bike with the spark plugs wires switched to the other plugs - ran the same rough. Then I started and...