Separate names with a comma.
Hello, the project is proceeding but I'm trying to find a suitable alloy WM2 x 19 x 40 Alloy rim for the 8" TLS (non-conical) front hub. The Jones...
Hello, looking for a right hand fork slider for a 1969 onward T100, the type with the TLS front brake and the wider fork yokes, so the brake plate...
Hello Folks, I'm trying to find a compact battery which would fit the 1969 Triumph T100 Daytona. As it's a cafe racer, space is a bit...
Hello, thanks for the reply. They're second hand but good condition. They have marks for AE (Hepolite?) inside but I can't find any marks as to...
Hello, the T100 cafe racer's coming along and I'm just about to fit the pistons. They're 9:1 squish band pistons +40 thou. The problem is...
Hello, wow, that's one blocked sludge trap! Thanks for the tips on the filters. I was looking at your thread Darkman and was wondering who does...
Hello, thanks for the replies - It's nice to know I'm not suffering alone! Cheers, Mikej
While building the cafe racer engine I bought a crankshaft off ebay and fortunately, the big ends only needed a polish. The sludge trap looked...
Hello again, it seems that the stub on the L/H side was bruised at the end and it fitted fine when the last 2mm were attacked with a bit of emery....
Hello, I've used a zinc plating kit which worked pretty well, although it all depends on surface preparation - what you see is what you get!...
Hello and thanks for the replies, I've been checking and the T100 went to a roller bearing on the left side of the gearbox in '61 and on the...
Hello, the 1969 T100 cafe racer build up is going on but I've hit a snag with the gearbox. The layshaft I have looks right but the left hand...
Hello, maybe Triumph tried to save money on the parts diagram books and used an older drawing with a wrong sized washer shown or maybe it was just...
Hello, according to the parts book on Draganfly it certainly looks as though the part no 50 (listed as 70-9503) fits inside the timing side...
Hello Darkman, The cases don't have a breather from the rear of the primary drive inner case so I'm guessing it has the pipe underneath....
Wow! thanks for all the welcomes! Building the T100 beastie up doesn't seem quite so daunting now. I'll ask my son to give me a hand with...
Thanks almegro, I think it was only fitted for the 1969 bikes as the later parts books don't list it, so maybe they changed the casting. I'll...
Hello Rocker, thanks for the tip! The part I'm after is No50 but having ordered one, it turned up as a smaller diameter part that wouldn't fit...