Might be time for a change......

Discussion in 'Speed Triple' started by Jody, Feb 26, 2017.

Page 1 of 2
  1. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #1 Jody, Feb 26, 2017
    Last edited: Feb 26, 2017
    Sadly it may be time for a change with my Speed Triple 2011...

    I've got the dreaded clutch stick and drag while riding and it's getting to the point where it's just pissing me off every ride so I think it will be going

    I've changed clutch fibres and steels, tried a modded pin then fitted the updated Triumph pin. Put standard levers back on, new cable. Filled with Silkolene Pro 4 and new filter when I fitted the new plates which people said improved their clutch no end but sadly did nothing for mine.

    It's definitely clutch related as when I clean the plates off they work ace when reinstalled but slowly start dragging/sticking over the week.

    I've spoke to EBC and Fuchs Silkolene and they could not offer any help.

    Other than changing the inner and outer basket for nigh on £500 there is nothing else I can try and I'm at the end of my tether with it.
     
  2. tcbandituk

    tcbandituk TC
    Subscriber

    Apr 8, 2016
    2,886
    1,000
    Reading
    #2 tcbandituk, Feb 26, 2017
    Have you replaced the clutch springs ?
     
  3. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #3 Jody, Feb 26, 2017
    No mate....

    Didn't see the need as they are working as in the clutch isn't slipping and when the clutch is cleaned of all oil it works fine

    I've heard of springs getting weaker and slipping but never getting stronger.... :/

    I think it's something to do with the oil not draining off the plates when sitting and causing the drag when riding, I have read that some bikes under warranty had the outer basket replaced but I'm not prepared to chance it at £400 for a new basket
     
  4. tcbandituk

    tcbandituk TC
    Subscriber

    Apr 8, 2016
    2,886
    1,000
    Reading
    #4 tcbandituk, Feb 26, 2017
    OK, so the plates hold too much oil and as they hold it they start to drag.

    I've never yet taken a Triumph clutch apart (Sounds like you have quite a few times now :confused: ) but guess they have a mix of plates like Suzukis?
    Have you tried swapping one of the thicker plates for a thinner plate to compensate ?

    Another possible thing, but I suspect you've probably already checked it, is the oil level, if it's too high it can cause drag.
     
  5. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #5 Jody, Feb 26, 2017
    Yeah mate I can have the clutch apart and back together within 15 minutes now ha ha

    Checked oil level and if anything a smidge low....

    It was new EBC fibre plates and Barnett steels

    All within spec and stack height within spec

    All in the correct Triumph order in the manual

    The outer plates have a very light bit of oil on them when I remove them, Its the inner 4 or 5 that have all the oil and are stuck together

    The outers separate when I pull the clutch lever but the inner ones stick like the preverbial shit and blanket
     
  6. tcbandituk

    tcbandituk TC
    Subscriber

    Apr 8, 2016
    2,886
    1,000
    Reading
    #6 tcbandituk, Feb 26, 2017
    Non OEM parts are quite possibly half the problem.
    I tried EBC plates on my old Bandit a while back, it developed the neat trick of slipping when accelerating and dragging when sat at traffic lights etc :mad:
    Swapped them out for OEM plates, no problems at all.

    When I was drag racing, virtually everybody used OEM plates even though they were more expensive* and you would get through a set per meeting !
    They were far more consistent than the after market items.


    *funny thing was Hayabusas and Blackbirds use the same friction clutch plates but the Honda ones were cheaper, so everyone used to buy them:)
     
  7. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #7 Jody, Feb 26, 2017
    It did it with the OEM ones before too mate....

    Hence me thinking EBC worth a try instead of £198 for OEM ones....
     
  8. tcbandituk

    tcbandituk TC
    Subscriber

    Apr 8, 2016
    2,886
    1,000
    Reading
    #8 tcbandituk, Feb 26, 2017
    Just had a look through your posts, looks like you've had some 'fun' with your Speed :confused:

    If it was me, I think I'd clean the plates up and part ex it as soon as I could for something else o_O
     
  9. burnley 94

    burnley 94 New Member

    Dec 27, 2016
    0
    1
    burnley
    #9 burnley 94, Feb 26, 2017
    hi all
    are the barrnet steel plates 1.6 mm and 2.0mm thick as thay have an order to go in, so the triumph manual says
    hope this helps
     
  10. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #10 Jody, Feb 26, 2017
    Ha ha yeah that's what I'm thinking mate......
     
  11. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #11 Jody, Feb 26, 2017
    Yep all correct thickness and correct order
     
  12. Rocker

    Rocker Elite Member

    May 1, 2016
    1,665
    800
    Suffolk
    #12 Rocker, Feb 26, 2017
  13. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #13 Jody, Feb 26, 2017
    Ha ha ha

    Sad to say as I commute all week and experiencing my Ducati with various niggles and this Speed Triple I think I'm going boring reliable Honda....
     
  14. old git

    old git Well-Known Member

    Jul 4, 2016
    194
    93
    Aberdeenshire, Scotland
    #14 old git, Feb 26, 2017
    I imagine you've checked for notching on inner and outer basket? We used to get it on KTM crossers and enduro bikes where cluches had a hard life. Careful dressing with a file worked wonders.
     
  15. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #15 Jody, Feb 26, 2017
    Yes mate...

    Tried everything I can think of or read...
     
  16. Tiglet

    Tiglet Vintage Member

    Mar 28, 2016
    4,434
    1,000
    Cheshire
    #16 Tiglet, Feb 26, 2017
    If there's no notching on the clutch basket as old git mentioned check the clutch is adjusted correctly as clutch drag can be down to incorrect adjustment.

    Have you tried another oil.
    Some clutches don't function correctly with fully synthetic oils.
     
  17. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #17 Jody, Feb 27, 2017
    Non silkolene in before and it dragged then, All adjusted correctly

    As posted previous, when I pull the lever the outer plates separate, I think there is a pooling of oil on the inner plates as the bike rest sticking them but nothing Ive tried gets the oil to clear
     
  18. R_1000

    R_1000 Elite Member

    Sep 2, 2016
    1,476
    700
    UK, London
    #18 R_1000, Feb 27, 2017
    I really hope you sort this out buddy. I can totally understand your frustration. You bought the bike to enjoy but it's not happening. There are plenty of good bikes out there with performance n handling BUT Triple does that all and she has a character to go with. However as I said if you are not getting what you want out of her then it's time to move on. Do give your best to sort it out before jumping the gun. All the best buddy ;)
     
    • Like Like x 2
  19. RROB

    RROB Active Member

    Jul 9, 2016
    80
    28
    Worcestershire
    #19 RROB, Feb 27, 2017
    Jody.....
    I guess you wont want the arrows now ??? lol
     
  20. Jody

    Jody Active Member

    Oct 9, 2016
    143
    43
    Nuneaton
    #20 Jody, Feb 28, 2017
    Yeah sorry Rob...

    I'm having a nightmare with it....came out this morning and it won't start

    Raced to work in the car and I'll have to try and sort it later
     
Page 1 of 2
Loading...
Similar Threads - Might change
  1. NaN

    I Might Have A Huge Problem Here - Battery Related - Trident 660

    NaN, Mar 29, 2023, in forum: Technical Help
    Replies:
    16
    Views:
    9,698
    RevPaul
    Mar 30, 2023
  2. Triumphant Tony

    Triumph T3 900 Cold Start/ Might Start

    Triumphant Tony, Jan 30, 2023, in forum: Technical Help
    Replies:
    10
    Views:
    1,118
    XCaTel
    Mar 21, 2023
  3. Jacknzone

    The Mighty Speedmaster 2075km Trip

    Jacknzone, Dec 25, 2022, in forum: Bonneville
    Replies:
    13
    Views:
    4,661
    Biggus
    Dec 27, 2022
  4. Iron

    The Mighty T140v

    Iron, Apr 29, 2022, in forum: Triumph General Discussion
    Replies:
    76
    Views:
    11,658
    Pokitren
    Jun 15, 2022
  5. Savagetitan

    Tiger 1050 Se Needs Headlight Upgrade, Someone Said The Tiger Sport Model Might Share The Same Beak?

    Savagetitan, Nov 7, 2020, in forum: Technical Help
    Replies:
    2
    Views:
    3,309
    Savagetitan
    Jan 1, 2021

Share This Page

Sign up