Belt drive clutch on t140v bonnie

Discussion in 'Technical Help' started by Tigertodd73, Sep 19, 2016.

  1. Tigertodd73

    Tigertodd73 Member

    Jun 10, 2016
    9
    8
    Kilmarnock
    #1 Tigertodd73, Sep 19, 2016
    Hi all. My clutch is slipping on my 73 t140v bonnie. Been told to get new clutch plates, pads and springs. It has a belt drive kit conversion. Is there certain plates, pads and springs i need to get?

    Cheers tiger
     
    • Like Like x 1
  2. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,639
    1,000
    Southcoast of the UK Earth
    #2 darkman, Sep 19, 2016
    Should take standard parts :)
     
    • Like Like x 1
  3. Tigertodd73

    Tigertodd73 Member

    Jun 10, 2016
    9
    8
    Kilmarnock
    #3 Tigertodd73, Sep 19, 2016
    Cheers darkman. Any particular make best?
     
    • Like Like x 1
  4. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,639
    1,000
    Southcoast of the UK Earth
    #4 darkman, Sep 19, 2016
    It's years since i did the clutch on my T120 and i get most of my parts locally from Ray at Brit Bits, do a bit of research and buy the best you can afford :) LP Williams and Burton bike spares.
     
    • Like Like x 2
  5. Vintage Triumph Supply

    Vintage Triumph Supply New Member

    Sep 21, 2016
    9
    3
    Massachusetts
    #5 Vintage Triumph Supply, Sep 21, 2016
    It depends on what you have for a belt drive.
     
    • Like Like x 1
  6. Tigertodd73

    Tigertodd73 Member

    Jun 10, 2016
    9
    8
    Kilmarnock
    #6 Tigertodd73, Sep 22, 2016
    I have a Tony Hayward conversion?
     
    • Like Like x 1
  7. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,639
    1,000
    Southcoast of the UK Earth
    #7 darkman, Sep 22, 2016
    They use the smaller 7 plate clutch set up :)
     
    • Like Like x 1
  8. Tigertodd73

    Tigertodd73 Member

    Jun 10, 2016
    9
    8
    Kilmarnock
    #8 Tigertodd73, Sep 22, 2016
    I seen that advertised. Can feel it slip when revs are high. My old man took the bike out a blast the other day and said it shud be pulling alot quicker in second gear. The bike also doesnt go into gear sometimes, as in i change into 3rd or 4th gear and it feels like neutral. Is this also the result of poor clutch plates?

    Cheers for help again.
     
    • Like Like x 1
  9. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,639
    1,000
    Southcoast of the UK Earth
    #9 darkman, Sep 22, 2016
    A poor clutch can mess up changes, one thing you could do is take it appart and clean it all up and refit and retry :)
     
    • Like Like x 2
  10. Tigertodd73

    Tigertodd73 Member

    Jun 10, 2016
    9
    8
    Kilmarnock
    #10 Tigertodd73, Sep 22, 2016
    Ok will try that tomorrow. I read somewhere about boiling the plates?
     
    • Like Like x 1
  11. darkman

    darkman Crème de la Crème

    Oct 26, 2015
    7,639
    1,000
    Southcoast of the UK Earth
    #11 darkman, Sep 22, 2016
    Lol, yes boiling water and a drop of detergent. but worth just stripping and giving a good clean if all parts look reasonable then refit.
     
    • Like Like x 3
  12. Tigertodd73

    Tigertodd73 Member

    Jun 10, 2016
    9
    8
    Kilmarnock
    #12 Tigertodd73, Sep 22, 2016
    Thanks again dude. :)
     
    • Like Like x 2
  13. joe mc donald

    joe mc donald Joe
    Subscriber

    Dec 26, 2014
    14,691
    1,000
    slough / burnham
    #13 joe mc donald, Sep 29, 2018
    Have you tried adjusting the centre springs. But I found Burton bike bits very good. I heard whether true or not Tony Hayward was know to say he wouldn't use a belt drive but no proof of it.
    Ride Free
    Joe,
     
Loading...
Similar Threads - Belt drive clutch
  1. Damien

    Life Of T-bird Drive Belt

    Damien, Jan 28, 2022, in forum: Thunderbird
    Replies:
    3
    Views:
    1,147
    Damien
    Jan 28, 2022
  2. Cupoftea

    Belt Drive Bonnie 120

    Cupoftea, Jan 23, 2019, in forum: Bonneville
    Replies:
    15
    Views:
    2,796
    ian650
    Jan 29, 2019
  3. Gaz477

    Squealing Drive Belt

    Gaz477, Aug 23, 2017, in forum: Thunderbird
    Replies:
    19
    Views:
    7,207
    Helmut Visor
    Sep 16, 2020
  4. Tinabiker

    America belt drive?

    Tinabiker, Jan 17, 2015, in forum: Technical Help
    Replies:
    0
    Views:
    813
    Tinabiker
    Jan 17, 2015
  5. Helmut Visor

    Belt Chirp/squeak/squeal Possible Solution

    Helmut Visor, May 16, 2021, in forum: Thunderbird
    Replies:
    2
    Views:
    1,594
    Alatamoc
    May 16, 2021

Share This Page

Sign up