Float Levels For Concentric Carbs

OK. Have completed a few maintenance tasks on my T100R: Replaced knackered throttle and speedo cables, spotted and replaced almost broken wire between the coils, replaced split rubber boot on clutch cable/gearbox cover, adjusted tappets (all of which had no movement at all (previous owner, not me!), and inspected float levels.

The floats I happily discovered to be the newer stay-ups, with new alluminium float needles, and new needle jets to boot (why don't people keep evidence of work done!) HOWEVER, the floats were higher than recommended so I lowered them to what they should be. Result, wouldn't start at all. So I re-set the float levels to where they were and she now starts. Either my measuring was rubbish or something else is at play, or maybe the stay up floats do need to be higher than the originals (although Amal dont say so. Any thoughts anyone?

 

Hmm. Good point. I think both Bonnies and Commandos were also often "upgraded" with Mikuni carbs.

I guess that 50 year old Amals are not exactly "cutting edge".