Motone Craig Bars For 2025 Speed Twin 900

Skipper · Nov 13, 2025

I am considering putting Motone Craig Crash Bars on my 2025 ST900. Has anyone put these on this particular model yet? Triumph has made some slight changes to the frame since 2024 but as far as I can tell the engine, and hence the mountings must still be in the same place as the previous model, so I feel encouraged to just go ahead and order some. I have emailed Motone about fit but so far there has been silence.

The Craig Bars are a bit unique in that they connect to each other as well as to the bike

https://www.motone.co.uk/motorcycle...ig-bars-engine-frame-crashbars-lc-black-p2469

so I also wonder if there are any downsides to fitting these particular bars. The word on the street seems to be that by connecting to each other as well as the bike, they are less likely to damage the bike frame in the event of a crash. Has anyone any views on this they might share?

beerkat · Nov 17, 2025

I’ve bought a ton of Motone stuff over the years for my Street Twin.
I’ve usually found the best way to contact them is phone, otherwise they’ve sometimes been a bit slow to respond via email.

In case you haven't noticed, Motone are currently offering a 22% Black Friday discount on everything, so grab it while you can!

Regit nogara · Nov 27, 2025 at 3:51 PM

Skipper said: ↑

I am considering putting Motone Craig Crash Bars on my 2025 ST900. Has anyone put these on this particular model yet? Triumph has made some slight changes to the frame since 2024 but as far as I can tell the engine, and hence the mountings must still be in the same place as the previous model, so I feel encouraged to just go ahead and order some. I have emailed Motone about fit but so far there has been silence.

The Craig Bars are a bit unique in that they connect to each other as well as to the bike

https://www.motone.co.uk/motorcycle...ig-bars-engine-frame-crashbars-lc-black-p2469

so I also wonder if there are any downsides to fitting these particular bars. The word on the street seems to be that by connecting to each other as well as the bike, they are less likely to damage the bike frame in the event of a crash. Has anyone any views on this they might share?
Click to expand...

Hi Skipper, have you considered Hepco and Becker, thinking of these for my T120.
Seen them in the flesh on a T120. German engineering. 12% off Moto Legends Distribution.
Tony