Hi, My name is Mark, and I live in Arlington Texas. I have a 2002 955i Daytona I am putting back together that I bought from a gentleman who had a low speed wreck, crashing into his neighbor who had backed out of his driveway without looking. I have all the bodywork painted with new decals, with the exception of the belly panel. Triumph lists the belly panel for all the second generation Daytonas, but the parts diagrams I have found so far do not show one. I guess maybe because they are not available, The part number is t2302903JD for the Caspian Blue belly panel, but I will settle for any color if I can find a decent one. They don't exactly give away that Caspian Blue color paint though. The bike ran well when I bought it, but it was slightly over 12,000, it's first real service interval. The previous owner had replaced the forks, but one side had a leaking seal. I pulled the tubes apart. Apparently he had run the fork oil quite low because the bushings were very worn, so I installed the bushing kit with new seals. I re-wired the regulator straight to the battery and installed the segment of wire from the stator to regulator that had larger gauge wire, and installed a ("Rick's") stator and regulator. I also cleaned the injectors and put in new spark plugs. It's going to be a beauty once again. I am one belly panel and a battery ( I want one with high cranking amps ). If anyone knows of a belly pan that's available, I would appreciate it ! Thank YOU for the Add !
@MarkF Welcome to the family. Should be a great rebuild and hope someone comes up trumps for you. Do complete your restoration on the projects section with pics and we can all take the journey with you.
Finding that specific belly pan is tough. Your best bet is to keep a close eye on eBay and Triumph-specific salvage yards. You might have better luck finding a used one in any color and then getting it painted to match. Good luck with the build, it sounds like it's going to be a great bike.